Introduction:

WT2080 LED Power Driver Test Instrument is the comprehensive test instrument for LED drive power which is according to GB/T 24825-2009 and IEC 62384:2006. It can measure the following parameters: Input Characteristics Test (AC&DC), Output Characteristics Test (AC&DC), Output Start Characteristics Test (DC) and Harmonic Testing. 
Specification:
1. Input Characteristics Test (AC)
    ? To measure the input voltage, current, power, power factor, power grid frequency
    ? The fundamental frequency scope of the current and voltage: 45Hz~65Hz; Narrowband range: 45Hz~5kHz; Broadband range: 45Hz~1MHz.
    ? Voltage range: 3~300 V (CF=1.67); Current range: 5mA ~ 2.7A (CF=3); Power range: 0.015~800 W; Power factor range: 0.000~1.000.
2. Input Characteristics Test (DC)
   ? Measuring voltage, current, power.
   ? Voltage range: 3~500V; Current range: 5mA~8A; Power range: 0.015~4000W
3. Output Characteristics Test (AC)
   ? Measuring lamp voltage, lamp current, lamp power.
   ? Lamp voltage range: 3~300V (CF=3); Lamp current range: 5mA~2.7A(CF=3); Lamp power range: 0.015~800W
4. Output Characteristics Test (DC)
   ? Measuring output lamp voltage, lamp current, lamp power, ripple wave current.
   ? Voltage range: 3~500V; Current range: 5mA~8A; Power range: 0.015~4KW; Ripple wave current range: 5mA~2.5A.
5. Output Start Characteristics Test (DC)
   ? Change curve and data of the measuring lamp voltage and lamp current within 0~2 seconds.
   ? Lamp voltage range: 3~500V; Lamp current range: 5mA~8A

6. Harmonic Testing
    Total harmonic and the harmonic component of 0~50 times, wave ratio, initial phase angle, peak phase angle, the phase Angle

Lisun Electronics Inc was found by Lisun Group in 2003. We have sales & service offices in Hong Kong and Shanghai. The Lisun Group were award CE certificate. As a CIE Supportive Member, all of the test instruments of Lisun Group are designed according to CIE Standards. Lisun Group's products have been sold to more than 50 countries and regions in Europe, America, Australis, Africa,South America and Asia. Its quality is well accepted by many companies such as GE, Phillps, Sharp, OSRAM, SONY and so on.