Overview:
The Inner Structure and Application of Flotation Machine:

This flotation machine is suitable for separating non-ferrous and ferrous metals as well as non metals such as fluorite and talc.The structure of flotation machine: this machine is mainly composed of pulp chute, mixing device, air charging system, mineralized bubble discharging device and electro motor.

The Working Process of Flotation Machine:

This machine runs by the triangle belt of the electrical motor driving the impellor to rotate, producing centrifugal effect which will form negative pressure, and on one hand it will absorb sufficient air in order to mix with the pulp, and on the other hand it will mix the pulp in order to mix with the reagents, and at the same time will refine the foam in order to stick the minerals onto the foam, and float on the surface of the pulp in order to become mineralization foam. The workers can adjust the height of the flashboard and control the liquid level in order to scrap the useful foam.

Features:
Before starting the machine, first check the bolts of all spare parts and before stopping the machine, manually spin the wheel to prevent the depositing of sediment from increasing the load of electro motor. During the working process, carefully adjust the height of the flashboard to maintain the stability of the liquid level, so that the mineralized bubbles on the liquid surface of the pump can be timely scraped to the launder. A certain space should be maintained between the impeller and the stator, and when the impeller is abraded, it should be changed timely, and the bearing inside the pump should be maintained every three month.

Working principle:
Mix the mashed rocks with water and necessary reagent in the mixing chute, and inject them to the pulp chute. Lead air to the pulp to make it form large quantities of bubbles, and some mineral particles that are difficult to get moist in water and that are generally called hydrophobic mineral particles will stick on the bubbles and float with the bubbles to the surface of the pulp to form mineralized bubble layer, and some other mineral particles that are easy to get moist in water and that are called hydrophilic mineral particles do not stick on the bubbles but stay in the pulp to discharge the mineralized bubbles containing specific minerals, thus completing the separation process.

Technical data:

Category	Specification  Model	Effective  cubage (m3)	Processing  capacity (m3/min)	Main shaft     loam board				Dimensions (L×W×H) (mm)	Single  trough  Weight (kg)
				Power (kw)	Rotate  speed (r/min)	Rotate  speed (r/min)	Power (kw)
XJK type  flotation  machine	XJK-0.35	0.35	0.18-0.4	1.5	483	25	1.1	700×700×700	460
	XJK-0.62	0.62	0.3-0.9	3.0	400	25	1.1	900×820×850	980
	XJK-1.1	1.1	0.6-1.6	5.5	330	25	1.1	1100×1100×1000	1390
	XJK-2.8	2.8	1.5-3.5	11	280	25	1.1	1750×1600×1100	2430
	XJK-5.8	5.8	5-7	22	240	25	1.5	2200×2200×1200	3533
SF type  flotation  machine	SF-0.37	0.37	0.2-0.4	1.5	386	25	1.1	700×700×750	468
	SF-0.7	0.7	0.3-0.9	3	400	25	1.1	900×820×950	990
	SF-1.2	1.2	0.6-1.6	5.5	330	25	1.1	1100×1100×1100	1873
	SF-2.8	2.8	1.5-3.5	11	268	25	1.1	1750×1600×1150	2538
	SF-4	4	2-4	15	220	25	1.5	1850×2050×1200	2838
	SF-8	8	4-8	30	191	25	1.5	2200×2900×1400	4129
	SF-10	10	5-10	30	191	25	1.5	2200×2900×1700	4486
	SF-20	20	5-20	30×2	191	25	1.5	2850×3800×2000	9828
JJF type  flotation  machine	JJF-2	2	1-3	7.5	443	25	1.5	1400×1400×1100	1670
	JJF-4	4	2-4	11	305	25	1.5	1600×2150×1250	2350
	JJF-8	8	4-8	22	233	25	1.5	2200×2900×1400	4500
	JJF-10	10	5-10	22	233	25	1.5	2200×2900×1700	4820
	JJF-16	16	5-16	30	180	25	1.5	2850×3800×1700	8000
	JJF-20	20	5-20	37	180	25	1.5	2850×3800×2000	10500