New asphalt emulsifier

General introduction as below:

Emulsified asphalt is means the asphalt,emulsifier and water together under the certain process to become liquid asphalt which is in oil in water or water in oil condision .

Emulsified asphalt is normally used at high temperature of asphalt road, through mechanical mixing and chemical stability method - emulsification, diffusion into the water and liquefaction at room temperature to become a very good a road building material which with low viscosity and good liquidity function.It can be used under common temperature and also can be used togetehr with cold and wet stone material.

Our New asphalt emulsifier including Fast split type, Slow split type, Middle split type and nonionic emulsifier for remixed formulation.Our products can solve your needs of emulsification and application requirements by different schemes, there are several optional basic type, can be used alone and also can be based on the need to meet with the complex use of emulsifiers with different cracking speed requirements of asphalt emulsion, let the asphalt particles uniformly dispersed in the water solution which mixing with emulsifer then to get the stable emulsion.Products used by domestic and foreign customers for long-term and get very good feedback, can be comparable with any global brand of emulsifier.

General dosage: about 0.3% in the preparation of emulsified asphalt.

 particularly,The following each cationic emulsifier In preparation of emulsified asphalt should be common used with  non-ionic emulsifier SM3B  and the ratio is usually 1:1 (best), the sum amount is about 0.3 -0.5% .

The final consumption  dependS on asphalt quality and curing speed.

General application:

1. Can be used in conventional emulsified asphalt preparation

2. Preparation of cold mix type and high content of emulsified asphalt (instead of hot asphalt),

3. Can be added in the process of asphalt concrete production  

New asphalt emulsifier SM-LL--Slow split type:

Appearance:Light yellow or yellow brown wax like solid

PH value: 6.5-7.5

Content: 80%

Type: cation