Function features:

1.This machine adopts electrical & electronic synchronous control technique both separate-phase welding and welding time is composed of digital and integrated electric circuit. This operation is accurate. It has stable function ,firm welded point and with out welded tracks.

2.The line wires are fed from coils, the cross wires are fed from precut wires.

3.Mesh pulling system adopts elastic tension link and opening  positioning mesh, it is easy to regulate the mesh hole and mesh opening size is rather accurate, welding aperture could adjust randomly with range. Not only welding speed is fast but also it is easy to learn and operate. Only two men can finish the operation.

Main parameter:

Wire diameter	3.0-5.0mm	Warp form	continuous
Weft spacing	50-200mm	Weft form	Pre-cut wire
Warp spacing	50-200mm	Rated voltage	380V
Width	1200mm	Rated power	125KVA×3
Welding speed	50times/min	Dimension	2750×1700×1800mm
Welding spots	24	Weight	2.2T

Products & Application:

casting floor mesh in the building, construction and so on.