A.Function features:

1.This machine adopts electrical electronic synchronous control technique both separate-phase welding and welding time is composed of digital and integrated electric circuit. This operation is accurate. It has stable function ,firm welded point and without welded tracks.

2.The cross and line wires are both fed from coils.

3.This machine is equipped with precise equipment for weft cutting and position, so the length of wefts is identical and regular, it is unnecessary to slice the side at all.

4.Mesh pulling system adopts elastic tension link and opening  positioning mesh, it is very easy to regulate the mesh hole and mesh opening size is rather accurate, welding aperture could adjust randomly with range. Not only welding speed is fast but also it is easy to learn and operate. Only two operators can do this work.

5.The finished products can be in coil or in panel.

B.Main parameter:

Wire diameter	1.5-2.5mm	Warp form	continuous
Weft spacing	50-150mm	Weft form	continuous
Warp spacing	50-150mm	Rated voltage	380V
Width	1200mm	Rated power	36KVA×2
Welding speed	80times/min	Dimension	2500×2500×1500mm
Welding spots	25	Weight	2.2T

C.Products Application:

1.mesh fence, casting roof mesh in the building.

2. 3d panel covered mesh, floor warmness preserving mesh, seedbed mesh, floor room mesh and

other construction.