Product purpose:                         

Mainly apply to thermal shock resistance experiment of refractory materials, ceramic materials and other materials.

Product features:

1. Take the ceramic fiber as the furnace chamber material, with the features of lightweight, small capacity, good heat-insulation effect and saving energy.

2. Double furnace door, one is pre-heating sintering door, which can make heavy firing experiment, the other is thermal shock resistance furnace door, which can used for thermal shock resistance experiment.

3. There is high purity aluminum horizontally on the thermal shock resistance furnace door, can be settled the sintering samples on the tube.

4. When process the thermal shock resistance experiment, please open the heavy firing furnace door, push the thermal shock resistance door into the chamber inside. When process the water cooling experiment, the tested samples can fall into the tank with circular water.

5. It can be programmed over 30 segments, can set and save 6 groups process route, and can be used at any time, PID auto-setting automatically, the PID parameters can be saved and be used in any time.

Data:

Model	Max. temperature(℃)	Working temperature(℃)	Cooling medium	Furnace temperature recovery time(min)	Heating-up rate(℃/min)	Temperature uniformity(℃)	Other product
SGM9817A	1700	1650	Water Air Compressed air	10	5-15	±10	Patend furnace door
SGM9816A	1600	1550		10	5-15	±8
SGM9813A	1300	1250		3	30-50	±5
SGM9812A	1200	1100		3	30-50	±5