Frp smc water tank

SMC combined water tank is assembled by moulding single board, sealing , metallic structure, and plumbing. We can assemble the one with 0.125m3~5,000m3 according to your need.

The period of use is over 30 years usage.

Material:

Project	Performance index
Tensile strength (Mpa)	≥60
Bending strength (Mpa)	≥100
Bending modulus (Gpa)	≥7.0
Pap hardness	≥60
Bibulous rate, %	≤1.0
Glass fiber content, %	≥25

They meet the "water standard for domestic living" (GB5749-85). No distortion, no leakage, high tensile strength, easy to maintain and repair, cost saving, long-term use.

Accessories:

Tank Structural Support :

- Standard Type : Hot Dipped Galvanised Steel- Standard Type : SS 304 Tie-Rod or Cleat Angle Stay

- Roof Support: PVC Vertical Poles and GRP roof panel stiffener

Sealant : Non toxic PVC foam

Bolt, Nuts, Washers :

- Standard : Hot Dipped Galvanised Steel

- Optional : SS 316 (In-contact with water)

- Roof: Hot Dipped Galvanised Steel or unless otherwise specified

Ladder Standard : Hot Dipped Galvanised Steel

Water Level Indicator :

Standard Reversed Reading Mechanical Ball Float Type with Mouse

Optional : Direct Reading Clear Tube Type

Cautions:

1. Please do not store water higher than 70 °c or other liquid (chemicals, oil and so on).

2. Keep away fire.

3. Prevent pollutants and plunges from outside.

4. Use soft apparatus to clean. As to the new water tank, clean twice before use.

Application:

The water tank has been widely used in residential buildings, hotels, office buildings, R& D buildings, schools, malls, restaurants and other public facilities as well as places with high requirements for water quality, such as hospitals and food processing plants.