400kw/500kVA Canopy Silent Cummins Diesel Generator Set


Please send your inquiry to me via Angela at genlitec doc com

Δ STANDARD CONFIGURATION
√ Industrial Cummins water-cooled diesel engine
√ Single bearing alternator with insulation class H and IP23
√ Standard CHINT or DELIXI circuit breaker, ABB as an optional
√ Steel base fuel tank with anti-vibration mounting
√ Based 8-10 hours build-in fuel tank
√ 9 dB muffler exhaust system, free-maintenance battery, user's manual
√ Flexible fuel lines and lube oil drain cock
√ Smartgen, ComAp or Deepsea controller module
√ Shrink wrap packing method
PRP: Prime power is available for an unlimited number of annual operating hours in variable
Load applications, in accordance with ISO8528-1.A 10% overload capability is available for a period of 1 hour within 12-hours period of operation
ESP: the Standby power rating is applicable for supplying emergency power in variable load applications for up to 200 hours per year in accordance with ISO8528-1. Overload is not allowed

Δ TESTING ITEMS
GENLITEC POWER provides a full line of brand new and high quality products. Each and every unit is strictly factory tested before shipment.
Parts faults testing; Fuel tank pressure testing; Bolt tightening torque testing; Painting thickness testing; Voltage bearing and insulation testing; Noise testing; Loading Testing(25%, 50%, 75%, 100%, 110% load to check verify that all control systems, alarm and shut-down protection.

Δ TECHNICAL DATA

Genset Model	GPC500(S)
Prime power (50Hz)	400KW/500KVA
Standby power (50Hz)	440KW/550KVA
Frequency/Speed	50Hz/1500rpm
Voltage	220V/380V
Phase	Three phase, four wires
Manufacturer	GENLITEC POWER
Engine model	Cummins KTA19-G4
Alternator model	Stamford HCI544C
Controller model	Deepsea DSE7320

 

ENGINE DATA
Manufacture	Cummins Engine Company Ltd.
Picture
Model	KTA19-G4
Engine speed	1500rpm
Engine power (Net)	507KW/680HP
Engine power (Gross)	563KW/755HP
Number of cylinders	6
Cylinder arrangement	Vertical in-line
Cycle	4-stroke
Aspiration	Turbocharged, Aftercooled
Combustion system	Direct injection
Compression ratio	13.9:1
Bore and Stroke	159 x 159mm
Displacement	18.9 liters
Fuel system	PB pump_GAC governor /BYC
Cooling system	Water cooled
Speed-droop	5%
Starting system	DC24V

 

FUEL CONSUMPTION
Engine speed	Fuel consumption
	G/kw.H	L/H
Standby power	206	136
Prime power	205	122
75% of prime power	210	94
50% of prime power	218	65

 

ALTERNATOR DATA
Manufacture	STAMFORD Co., Ltd.
Picture
Model	HCI544C
Output power	400KW/500KVA
Number of phase	3
Power factor (Cos Phi)	0.8
Altitude	≤1000m
over speed	2250RPM
Number of pole	4
Exciter type	Shunt
Insulation class	H
Voltage regulation	±0.5%
Sustained short circuit current	300% (3 in): 10s
Total harmonics (TGH/THC)	<4%
Wave form: NEMA = TIF	<50
Wave form: I.E.C = THF	<2%
Bearing	Single
Coupling	Direct

 Δ STANDARD SUPPLY SCOPE

Exhaust silencer	Flexible pipes	Flange	Base frame	Main circuit breaker
Starting battery	Battery wires	Battery charger	Float battery charger	AVR
Cooling radiator	Wires diagram	Manual books	Auto control panel	Silent canopy

Δ OPTIONAL PARTS

Engine & Radiator	Alternator part	Electric part	Fuel tank part	Others
Water preheater	PMG	ATS	External daily fuel tank	Weatherproof canopy
Lub oil pre-heater	Anti-condensation heater	Synchronization panel	Automatic fuel pump	Mobile trailer
Spare parts	Parallel droop	ABB breaker	Oil drain pump	Containerized

Δ GPC SERIES DIESEL GENERATOR SET POWER RANGE
50Hz
3 phase, 4 wires, 0.8PF, 1500rpm, 415-230V/240-115V

Genset Model	Prime Power		Standby Power		Engine	Fuel consumption	Dimension	Weight
	KW	KVA	KW	KVA	CUMMINS	L/h	MM	KG
GPC25-I	20	25	22	28	4B3.9-G1	7.1	1610×730×1285	650
GPC25-II	20	25	22	28	4B3.9-G2	6.7	1610×730×1285	650
GPC40-I	32	40	35	44	4BT3.9-G1	10.0	1660×730×1285	700
GPC40-II	32	40	35	44	4BT3.9-G2	9.3	1660×730×1285	700
GPC50	40	50	44	55	4BTA3.9-G2	12.9	1700×730×1285	770
GPC56	45	56	50	62	4BTA3.9-G2	14.9	1730×730×1285	800
GPC65	52	65	57	72	4BTA3.9-G2	14.9	1730×730×1285	800
GPC80	64	80	70	88	4BTA3.9-G11	17.6	1780×730×1285	850
GPC94-I	75	94	83	103	6BT5.9-G1	21.7	2090×785×1440	1100
GPC94-II	75	94	83	103	6BT5.9-G2	22.0	2090×785×1440	1100
GPC100-I	80	100	88	110	6BT5.9-G1	21.7	2090×785×1440	1100
GPC100-II	80	100	88	110	6BT5.9-G2	22.0	2090×785×1440	1100
GPC105	84	105	92	116	6BT5.9-G2	24.2	2090×785×1440	1100
GPC125-I	100	125	110	138	6BTA5.9-G2	27.0	2150×785×1440	1250
GPC125-II	100	125	110	138	6BTAA5.9-G2	30.0	2220×785×1440	1250
GPC135	108	135	119	149	6BTAA5.9-G2	30.0	2220×785×1440	1250
GPC150-I	120	150	132	165	6CTA8.3-G1	42.0	2260×840×1560	1600
GPC150-II	120	150	132	165	6CTA8.3-G2	42.0	2260×840×1560	1600
GPC155	124	155	136	171	6BTAA5.9-G12	34.0	2260×840×1560	1600
GPC188-I	150	188	165	206	6CTA8.3-G1	42.0	2380×840×1560	1800
GPC188-II	150	188	165	206	6CTA8.3-G2	42.0	2380×840×1560	1800
GPC200	160	200	176	220	6CTAA8.3-G2	45.0	2470×965×1650	1800
GPC250-I	200	250	220	275	6LTAA8.9-G2	53.0	2570×1000×1650	2000
GPC250-II	200	250	220	275	6LTAA8.9-G3	54.0	2570×1000×1650	2000
GPC313	250	313	275	344	QSM11-G2	69.0	2920×1000×1800	2500
GPC360	288	360	317	396	QSZ13-G6	72.3	2970×1360×2100	3000
GPC388	310	388	341	426	6ZTAA13-G3	76.5	2920×1000×1800	2700
GPC400	320	400	352	440	QSZ13-G7	82.0	2970×1360×2100	3000
GPC438	350	438	385	481	QSZ13-G2	78.4	2970×1360×2100	3000
GPC438-I	350	438	385	481	6ZTAA13-G2	89.1	2970×1360×2100	3000
GPC438-II	350	438	385	481	6ZTAA13-G4	91.4	2970×1360×2100	3000
GPC450-I	360	450	396	495	QSZ13-G5	84.0	3050×1360×2100	3200
GPC500-I	400	500	440	550	QSZ13-G3	101.0	3050×1360×2100	3200
GPC250-III	200	250	220	275	NT855-GA	53.0	2950×1100×1900	2200
GPC250-IV	200	250	220	275	MTA11-G2A	55.0	2830×1100×1710	2200
GPC250-V	200	250	220	275	MTA11-G2	52.0	2830×1100×1710	2200
GPC250-VI	200	250	220	275	NTA855-G1	59.0	2950×1100×1900	2800
GPC275	220	275	242	303	NTA855-G1A	61.0	2950×1100×1900	2850
GPC313-I	250	313	275	344	MTAA11-G3	61.3	2980×1100×1710	2500
GPC313-II	250	313	275	344	NTA855-G1B	68.0	3060×1100×1710	3000
GPC313-III	250	313	275	344	NTA855-G2	68.0	3060×1100×1710	3000
GPC344	275	344	303	378	NTA855-G2A	72.0	3060×1100×1710	3000
GPC350	280	350	308	385	NTA855-G4	75.0	3060×1100×1710	3100
GPC365-I	292	365	321	402	NTAA855-G7	86.0	3060×1230×2000	3150
GPC365-II	292	365	321	402	KTA19-G2	83.0	3100×1310×2130	3500
GPC400	320	400	352	440	QSNT-G3	70.5	3100×1310×2130	3500
GPC450-II	360	450	396	495	KTA19-G3	97.0	3140×1310×2130	3600
GPC500-II	400	500	440	550	KTA19-G3A	106.9	3250×1310×2130	4000
GPC500-III	400	500	440	550	KTA19-G4	107.0	3250×1310×2130	4000
GPC525	420	525	462	578	KTAA19-G5	113.0	3470×1550×2200	4100
GPC575-I	460	575	506	633	KTAA19-G6	118.5	3470×1550×2200	4350
GPC625	500	625	550	688	KT38-G	140.0	4050×1700×2500	6500
GPC650	520	650	572	715	QSKTAA19-G4	143.0	3600×1550×2500	4700
GPC713	570	713	627	784	KTA38-G1	160.4	4200×1700×2500	6500
GPC725	580	725	638	798	KT38-GA	168.2	4200×1700×2500	6500
GPC750	600	750	660	825	KTA38-G2	167.0	4200×1700×2500	6500
GPC800	640	800	704	880	KTA38-G2B	167.3	4200×1700×2500	6500
GPC910	728	910	801	1001	KTA38-G2A	191.0	4300×1700×2500	7000
GPC1000	800	1000	880	1100	KTA38-G5	209.0	4250×2060×2500	7200
GPC1250-I	1000	1250	1100	1375	QSK38-G5	274.0	4470×2080×2820	8200
GPC1250-II	1000	1250	1100	1375	KTA50-G3	254.0	4830×2060×2350	8800
GPC1375	1100	1375	1210	1513	KTA50-G8	289.0	5430×2120×2550	9600
GPC1500	1200	1500	1320	1650	KTA50-GS8	308.8	5430×2120×2550	9800
GPC1875	1500	1875	1650	2063	QSK60G3	371.0	5710×2200×2650	15152
GPC2000	1600	2000	1760	2200	QSK60G4	394.0	5710×2200×2650	15366

*please seeking for more engine models.
*alternator option: KWEIS series brushless synchronous AC alternator;Stamford; Leory Somer etc.

Δ FINISHED PRODUCTION
√ Genlitec power is a power equipments manufacturer and service provider in CHINA mainland.
√ Prodcuts range: Engines, Generators, Water Pumps, Mobile Lighting Towers, Mini Construction Machines
Δ COMAPNY OVERVIEW
√ Company name: Genlitec (Fuzhou) Power Equipment Co., Ltd.
√ Value: Power Anywhere Anytime...
√ Business type: Power equipment manufacturer and service provider
√ Founded: 2010 year
√ Products range: Engines, Generators, Water Pumps, Mobile Lighting Towers,  Mini Construction Machines
√ Professional Team
Genlitec Power technicians and engineers are hard-working and serious with their work. Compliance, standard and process are fundamentals of our high quality products.
Members of our products development team are rich in professional skills and familiar with products. with the help of advanced development tools and management platforms, we will always be ready to provide best service to all our customs.

Δ FAQ (FREQUENCY ASKED QUESTION)
Question: What's your warranty period?
Answer: Our payment terms is 1 year or 1000 running hours whichever comes first. but based on some special project, we can extended our warranty period.
Question: Does your generators has global warranty?
Answer: Yes, most of our products like Cummins, Perkins, Doosan power generator enjoy the global warranty service. and the alternator we use like Leroysomer, Stamford, marathon also enjoy the global warranty service, so you do not need to worry about the aftersales service.
Question: Do you accept OEM/ODM service?
Answer: Yes, we can accept OEM.
Question: What's your payment terms?
Answer: We can accept T/T 30% in advance, and the balance 70% shall be paid before shipment or L/C at sight, L/C deferred payment terms or west union. 
Question: What's your delivery time?
Answer: Our normal delivery time is 25 working days. but if your order is some special engine and alternator, then the delivery time is longer.