10/100/1000M Ethernet Fiber Media Converter
General Description
The media converter transforms the transmission media of Ethernet signal from CAT5 to optical fiber .It can extend the transmission distance to several kilometers or hundred kilometers.This product supports IEEE802.3U IEEE802.3z 1000Base-Tx/Fx protocol,as well as full duplex and half duplex mode.
Key Features
In conformity to IEEE 802.3 10Base-T,IEEE 802.3u 100Base-TX and IEEE802.3z standards.
Built-in high efficient SRAM data storage space,with 1K query table,and 4-way associative hash algorithm.
Supports back pressure flow control,IEEE802.3x and half duplex.
Support MDI/MDI-X auto-sensing.
Optional internal or external power supply.
Optional SC,ST,FC or LC optical fiber connector.
LED indicators display the equipment's operating status.
Supports 2U,14-slot rack-mounted(for external power supply,desk type media converter only);supports U,14-slot rack-mounted(for card type,gigabit media converter only);
Connection Diagram
Technical Parameter
|
10/100/1000M Media Converter |
|
|
Protocol |
IEEE802.3 10 Base-T IEEE802.3u 100 Base-TX IEEE802.3z IEEE802.3abstandard. |
|
Connector |
One UTP RJ-45 connector One SC/ST/connector |
|
Operating mode |
Full duplex mode or half duplex mode |
|
Power supply |
Power adapter(External):110-265V AC input,5V1A DC output Power supply(Internal):110-265V AC input,5V1ADC output |
|
Operating temperature |
0 ℃~50℃ |
|
Relative humidity |
5%~90% |
|
TP Cable |
Cat5 UTP cable |
|
Transfer fiber |
Single mode:8.3/125,8.7/125,9/125 or 10/125um |
|
Dimensions |
External power supply:94mm(L)x71mm(W)x26mm(H) Internal power supply:150mm(L)x110mm(W)x28mm(H) |
LED indicator lamps
|
LED indicator |
Status |
Explanation |
|
Link/Act |
On |
Connection status display for link " ON" indicates that link is in correct connection. |
|
Blink |
Active status display of fiber port or RJ45 port. " Blink" indicates packet goes through media converter. |
|
|
FDX |
On |
Transceiver works in the full duplex mode. |
|
Off |
Transceiver works in the half duplex mode. |
|
|
PWR |
On |
Power is on and normal. |
|
1000 |
On |
Transfer rate of electric interface is 1000Mbps. |
|
100 |
On |
Transfer rate of electric interface is 100Mbps. |
Transmission characteristics of single fiber transceiver
|
Product model |
Optical wavelength(nm) |
Transmitting optical power(dBm) |
Receiving sensitivity (dBm) |
Standard loss(dBm) |
|
Single/SC/SM 20km |
1310/1550 |
≥-9 |
-24 |
1310nm 0.4dBm/KM 1550nm 0.25dBm/KM 1490nm 0.25dBm/KM |
|
Single/SC/SM 40km |
1310/1550 |
＞-4 |
-24 |
|
|
Single/SC/SM 60km |
1310/1550 |
＞-1 |
-24 |
|
|
Single/SC/SM 80km |
1490/1550 |
≥0 |
-24 |
Transmission characteristics of dual fiber transceiver
|
Product model |
Optical wavelength(nm) |
Transmitting optical power(dBm) |
Sensibility (dBm) |
Loss enable (dBm) |
|
Dual/SC/SM 550m |
1310 |
-10~-5 |
-23 |
7 |
|
Dual/SC/SM 20km |
1310 |
-9~-3 |
-24 |
11 |
|
Dual /SC/SM 40km |
1310 |
-2~-3 |
-24 |
20 |
|
Dual SC/SM 60km |
1550 |
-3~2 |
-24 |
19 |
|
Dual SC/SM 80km |
1550 |
-3~2 |
-24 |
24 |
|
Dual SC/SM 100km |
1550 |
0~3 |
-27 |
27 |
Volume,Box Volume and Weight info
|
10/100/1000M Ethernet Fiber Media (Extenal power supply|)Volume |
||||
|
Product Name |
Length |
Width |
Height |
Volume |
|
10/100/1000M Ethernet Fiber Media (External power supply) |
94mm |
71mm |
26mm |
173524mm3 |
|
10/100/1000M Ethernet Fiber Media (External power supply)Box Volume |
||||
|
Product Name |
Length |
Width |
Height |
Volume |
|
10/100/1000M Ethernet Fiber Media (External power supply) |
240mm |
126mm |
53mm |
1602720mm |
|
10/100/1000M Ethernet Fiber Media (External power supply) Weight |
||||
|
Product Name |
Weight |
Each Net Weight |
||
|
10/100/1000M Ethernet Fiber Media (External power supply) |
0.4kg |
0.26kg |
||