Equipment Special for plate parts processing__ CNC  lathe machine

Feature:

    This machine uses the domestic and foreign advanced technologies, computerized module design with brand-new structure. The machine needn't to wait for warming, which can run once start up. The precision and stability is good, cost performance is high, does not take up much area.  It is easy to install and saving a lot labor force. One-time to clamp, that can realize most or all of processing requirements of complex parts, especially to process multispecies and medium and low volume.

 Technical parameter:

Model			VT4545
machining capacity	max. swing dia.	mm	600
	max. turing dia.	mm	450
	max. turning height	mm	450
	max. weight	kg	200
spindle	motor power	Kw	15/18.5
	speed range	rpm	50-2500
	inner dia. Of front bearing	mm	130
	model of spindle end		A2-8
feeding	x-axis travel	mm	300
	Z-axis travel	mm	450
	X/Z-axis rapid speed	m/min	15/18
	distance between spindle end & turret end	mm	150-600
accuracy	positioning accuracy	mm	0.016
	repeatability positioning accuracy	mm	0.007
power	Supply voltage	V	380V50HZ
	total power	Kw	20
outside look	L×W×H	mm	1580×2400×2630
net weight		kg	6000

 Physical Features

 1.Lathe bed design is rib plate multi-sections changing construction. It adopts anti-seismic filling material inside the lathe bed, it can increase the rigidity and aseismicity of lathe.

2.X guide adopts multi-guide exceed locating mode, it can increase the rigidity of lathe and the precision is high.

3.Spindle bear adopts two-front and four-back structure, it can increase the rigidity and anti-seismicity of spindle, the precision is high.

4.The diameter of lead screw is increased 1.5 to 2 times, so that it increases the driving force and enhances cutting rigidity.

5.Lathe adopts advanced pre-positive chip removal, it doesn't destroy the whole rigidity of lathe. You can also add automatic chip removal device.

6.Lathe adopts fully enclosure hood, it is very elegant.

7.It adopts automatic lubrication device without maintenance.