Multifunctional Sawdust Wood Crusher/wood crusher machine/wood crushing machine  

2. During the working process, the raw wood will be chipped, re-crushed and sieved, 

the wood crusher combines both chipping and crushing in one machine to get the wood 

sawdust directly. 

3.The diameter of wood sawdust can reach to 2-5 mm, which is suitable for further drying 

and briquetting. No need to use other wood chippers. 

4.Wood crusher machine shows the advantages of precise structure, high capacity, energy 

consumption, high-quality finished products, easy maintenance, etc.

5.Machine can installed on the cart or farm vehicle, Engine can be electromotor,diesel engine,gasoline engine,both of them are ok for working, Crushing type can be mobile and fixed-line.It can drive by electric motor and diesel engine two-ways for choice.

6.To ensure security, do not put the nails into the wood crusher.

 The structure of  wood hammer mill:

1.the wood crusher machine is composed of machine body, knife chipping part, 

chips re-crush part and sieving part ,ect. 

2.It combines both chipping and crushing in one machine, can make sawdust in one passage, no need to use wood chipper for preprocessing of wood logs.

3.To ensure security, the feed inlet of this crushing equipment adopts self-action design to avoid serious damage to operators.

The raw material of wood hammer mill 

1.This machine can be a variety of wood, wood waste, branches with branches, wood chips, boards edge material once processed into sawdust, bark, bamboo, bamboo, leather and other raw materials, wood-like product,with less investment, low energy consumption, productivityhigh, good economic returns, easy maintenance advantages.

2.After the small particle size of crushed sawdust, wood wool fibers, uniform material. Equipment package only driven with an electric motor, the structure is simple, compact layout, the price is cheap, stable, low energy consumption,high output,sawdust finished good quality and low processing cost. Bamboo, grass, corn stalks, sorghum stalks and other fibrous stalk-like materials can also be used for the chips.

3.The sawdust machine also can be a high particle board, sawdust board MDF raw materials used in the production.

Model	Capacity (kg/h)	Power (kW)	Feed size (mm)	Output size   (mm)	Net Weight (kg)	Hammer number (pieces)	Dimension (mm)
YHHM200	800-1200	22	300*250	3.0-12.0	1100	24	1500×1000×1100
YHHM300	1000-2000	37	500*270	3.0-12.0	1500	48	1700×1000×1100
YHHM400	2000-3000	45	750*270	3.0-12.0	1900	72	2100×1000×1100
YHHM500	3000-4000	75	1000*270	3.0-12.0	2300	90	2400×1000×1100