Biocide DH-CG is an aqueous solution micro-biocide, it is a very popular preservative for personal care and other applications, which include cosmetics, water based coatings such as paints, slurries, dispersed pigments, adhesives, latex emulsions, and process water. The active ingredient provides broad-spectrum activity against common bacteria and fungi. DMDMH is approved by EPA and FDA for cosmetics and industrial applications and is highly recommended for water containing systems with pH 4-12.

1. Chemically stable in high pH formulations up to 12

2. Broad Spectrum Efficacy

3. No heavy metal salts and APE surfactant

4. Compatible with all surfactants and other ingredients

5. Low toxicity and irritation

6. Widely used in the world

7. No heavy metal salts, no side effect to the skin and eyes in daily use.

Biocide DH-CG has been used in personal care, cosmetics and other high pH water containing systems. Biocide DH-CG can be added in at any stages of the production. 3D Bio-Chem can assist your to decide the use level in you specific products.

Typical use concentrations are in the range of 0.1-0.6% (w/w) in the final products. It should be noticed that a good manufacturing practices should be applied and equipment, pipes, and storage tanks should be sanitized by Biocide DBNPA-20 regularly.

Use of personal protective equipment such as chemical impervious gloves for hands, safety goggles and shields for eyes are strongly advised. If the product comes in contact with the skin, wash immediately with plenty of water. In case of eye contact, rinse immediately with plenty of water and seek medical attention. The product should be stored at room temperature.