Model Number: | HO-102 |
---|---|
Brand Name: | SNR |
Place of Origin: | China (Mainland) |
Quick Details
Specifications
HO-102 uses the chemical treatment on the non-corona surface of BOPET and the metalized treatment on the corona surface of BOPET, which enhances its capability of barriering water vapor and oxygen, and its compounding and bonding functions. It is mainly applied to the long-term storage of such articles as tea, milk powder, coffee, cookie, chips, wheat biscuit, vitellus pie, almond crisp, savory fillet, medicine, Dora-Yaki, ketchup, hot-pot soup base, seasoning soft packing, solar cooker, etc.
●High gloss; ●Good printability
●Good insulating and reflecting properties; ●Good UV and IR resistances;
●Good barrier property and fragrance retentivity; ●Good health security
●Good optical and dimensional stabilities; ●Good strength and stiffness, cold/heat resistances;
3. Standard Specifications
The Thickness of the film |
The Standard Length(m) |
Adjusted Length (times of standard) |
8-50 um |
6000 |
1,2,3,4 |
The Joint Qty(pc) |
One is allowed, it should be controlled below 10% of standard film length. |
|
Width |
300-2250 mm |
|
Roll Core Diameter ID |
3" (76.2mm) ; 6" (152.4mm) |
4. Physical and Mechanical Properties of VMCPP
No. |
The Item |
|
Typical Values of MPET |
|
1 |
Tensile strength Mpa≥ |
MD |
190 |
|
TD |
200 |
|||
2 |
The Elongation At Break %≥ |
MD |
100 |
|
TD |
100 |
|||
3 |
The Shrinkage(150℃,30min) %≤ |
MD |
2 |
|
TD |
1.5 150 ℃ 30 min |
|||
4 |
The Wetting Tension mN/m |
56 |
||
5 |
Adhesion of Aluminium Layer |
Excellent |
||
6 |
Thickness of Aluminium Layer Ω/□; OD |
0.8-4.0Ω/□ |
0.4-3.5OD |
|
7 |
Uniformity of Aluminium Layer±% |
5-10 |
All property indexes above are the typical data of this model, for your reference only. Customers can put forward reasonable requirements in thickness, uniformity, etc. of the aluminum coating according to your demands, and indicate in your order.