| Model Number: | snr-108 |
|---|---|
| Brand Name: | SNR |
| Place of Origin: | China (Mainland) |
Quick Details
Specifications
SNR-108 is a kind of half-coating film. It is mainly used as packing material that single surface is visible. The candle line between the metalized film and the optical film is very fine, and the size error of the metalized film and the optical film is relatively small. It is mainly used as outer packing of electrical appliance and tools, etc., and soft packing of foods and medicines having short shelf life.
2. Properties
●High gloss; ●Good printability
●Good insulating and reflecting properties; ●Good UV and IR resistances;
●Good barrier property and fragrance retentivity; ●Good health security
●Good optical and dimensional stabilities; ●Good strength and stiffness, cold/heat resistances;
3. Standard Specifications
|
The Thickness of the film |
The Standard Length(m) |
Adjusted Length (times of standard) |
|
8-50 um |
6000 |
1,2,3,4 |
|
The Joint Qty(pc) |
One is allowed, it should be controlled below 10% of standard film length. |
|
|
Width |
300-2250 mm |
|
|
Roll Core Diameter ID |
3" (76.2mm) ; 6" (152.4mm) |
|
4. Physical and Mechanical Properties of VMCPP
|
No. |
The Item |
|
Typical Values of MPET |
|
|
1 |
Tensile strength Mpa≥ |
MD |
190 |
|
|
TD |
200 |
|||
|
2 |
The Elongation At Break %≥ |
MD |
100 |
|
|
TD |
100 |
|||
|
3 |
The Shrinkage(150℃,30min) %≤ |
MD |
2 |
|
|
TD |
1.5 150 ℃ 30 min |
|||
|
4 |
The Wetting Tension mN/m |
56 |
||
|
5 |
Adhesion of Aluminium Layer |
Excellent |
||
|
6 |
Thickness of Aluminium Layer Ω/□; OD |
0.8-4.0Ω/□ |
0.4-3.5OD |
|
|
7 |
Uniformity of Aluminium Layer±％ |
5-10 |
||
All property indexes above are the typical data of this model, for your reference only. Customers can put forward reasonable requirements in thickness, uniformity, etc. of the aluminum coating according to your demands, and indicate in your order.