It could adjust sequential time by yourself.  The time range is from 0.1 S to 9.9 S.  Please find the pictures below.

the whole firing system is including one 24 cues transmitter and 2 receivers.

Video Link:http://> 

Parameters of transmitter

1. Powered by input 1pc 4.2V internal rechargeable lithium battery, output voltage: 12V, less weight and longer life.

2. with battery low indicator. Charging on AC for 8 hours.

3. with launching lamp.

4. with antenna, more stable. The remote distance is 800M.

6. with " rapid" button, it is divided into parts, " 1-12" and " 13-24" to do thesequential fire

7. Waterproof case

8. It could divide into 100 districts (control 100pcs 24 channels receivers at max). Please notice the " district" button on the top right corner. When you adjust it to " 1" , it will control the first 24 channels of first receiver (district). When you adjust it to " 2" , it will run the second receiver (district).

Parameters of receiver

1. Powered by input 1pc 4.2V internal rechargeable lithium battery, output voltage: 12V, less weight and longer life.

2. with battery low indicator. Charging on AC for 8 hours.

3. with " TEST" function. The LED will turns RED when the products are connecting well.

5. Waterproof case

8. It could divide into 10 districts (control 10pcs 24 channels receivers at max). Please notice the " district" button

on the top right corner. When you adjust it to " 1" , it will control the first 24 channels of first receiver (district).

When you adjust it to " 2" , it will run the second receiver (district).

Usage method

1. Please charging the transmitter and receivers on AC for 8 hours. 

2. TEST- Please turns on power switch of transmitter. Move the safety switch to test position. And then connect products into red&black plug .Then press the button one by one. It indicates the products are connected well if the test lamps on receiver get red one by one.

3. Program the transmitter and receiver. 

A. If you want the transmitter to run one receiver at one time,

Please adjust transmitter to " 1" , and then adjust receiver to " 1" , too. In such a case, you can operate the transmitter with the " 1" transmitter.

B. If you want transmitter to run two receivers at one time.

Please adjust transmitter to " 1" , and then adjust two receivers to " 1" , too. In such a case, if you press Button" 1" , the channel " 1" on both receivers will fire. Press button" 2" , then channel " 2" on both receivers will fire. If you want to do the sequential fire, please press " rapid switch" . (You could decide interval time for sequential) You could use the transmitter to control many receivers to fire together by this way.

How to do Sequential fire

1.If you want to make one receiver do sequential fire, please turn on the two buttons , which

are the " 1-12" and" 12-24" . And then please press the " rapid" button. And then all the channels

will fire sequentially.

2.When you want several receivers sequential fire together. Please adjust to the same " district" number. And you can do sequential fire.

3.When you want several receivers do the sequential fire one by one. You could adjust transmitter " District" to " 0" and then adjust the receivers " District" to " 1,2,3,4…"

Now when the first receiver done sequential fire, the second will start, and then the receivers will fire one by one.

 Attentions:

1.Please do not shake incept box violently, when no need use it .

2.Notice to prevent defile incept box when it?s close to fireworks.

3.Please take the cell out when no use products, for prevent defile incept box.

4.Please don?t place the product in the damp , sour ,alkali and pollution environment.