Crush Tester RCT,ECT,FCT,PAT,CMT
         
Information
CY303A Crush  tester is the board's basic equipment performance testing compressive strength (ie, paper packaging testing instruments), the test item are: base paper ring compression strength test (RCT), corrugated board compression strength test (ECT), corrugated board adhesive strength test (PAT), corrugated board flat crush strength test (FCT), corrugated base paper from the laboratory after the compression strength (CCT) peace compressive strength (CMT), using high-precision sensors, high-speed chip design, to ensure sampling accuracy. Its performance parameters and technical indicators in line with relevant national standards.

Features
1. the apparatus of high precision, simple operation (can be ring crush, edge pressure, adhesive, pressure-strength test, etc.), stable and reliable performance.
2. using the NXP (Philip) high-performance ARM core processor and dual-channel 24-bit Cirrus independent high-speed sampling chip, high-speed operation to ensure accurate sampling and processing, and effective to ensure test accuracy.
3. 5.1 inch LCD screen, test, test the value of real-time display, the sample curves and other information.
4. automatic measurement sample, the maximum peak intelligent lock, powerful data management and analysis, 99 sets of data to save, print function, fault alarm and sensor non-linear correction function.
5. N, kgf, lbf switching between units.
6. real-time clock, eliminating manual input before printing the date or the date of the tedious hand-filling operations.
7. reserved for RS232, USB2.0 communication interface for easy connection to upgrade to the computer control.

Application
Mainly used in paper ring compression strength test (RCT), corrugated board compression strength test (ECT), corrugated board adhesive strength test (PAT), corrugated board flat crush strength test (FCT), corrugated base paper from the laboratory after the compression strength (CCT) peace compressive strength (CMT)

Standard
1. (GB / T  6546   corrugated board compression strength test)
2. (GB / T  6548   Determination of adhesive strength of corrugated board method)
3. (GB / T  2679.8   Paper and cardboard ring crush strength determination)
4. (GB / T  2679.6   corrugated paper Determination of flat crush strength)
5. (GB / T  22874   and single-sided corrugated board Determination of flat crush strength)

Parameters
1. Measuring range: 60N ~ 3000N
2. Accuracy: <0.5% (less than 0.3% measured)
3. Resolution: 1N
4. Plate test speed: 12.5 ± 2.5mm/min
5. Plate diameter: 120 mm (according to customer request)
6. The maximum distance between the upper and lower plate: 80 mm
7. Power source: AC220V   3A   50Hz
8. Dimensions: 360mm × 330mm × 510mm
9. Weight: 55kg

CY303A-1 RCT Sample Cutter

Information
CY303A-1 RCT Sample Cutter is a special sampling appliance for ring crush test (RCT) of paper. The sampler, with advantages of high sampling dimensional accuracy, simple operation, etc., is an ideal auxiliary test appliance for papermaking, packaging, scientific research and quality inspection industries and departments.

Standard
1.(GB/T  2679.8   Method for Measuring Ring Crush Strength of Paperboard)

Features
1.It uses double-ball guide sleeve, ensuring firmer and higher sampling accuracy.
2. It is made of sturdy material, and has total weight of 35kg, sharp knife edge, and light and stable sampling process.

Parameters
1. Sample Width: 0.1mm ~ 1.0mm
2. Sample Dimensions: 152±0.2mm ×12.7±0.1mm
3. Overall Dimensions: 530mm ×150mm ×405mm
4. Weight: 35kg

CY303A-2 RCT Center Disk

Information
CY303A-2 RCT center disk is a special appliance for testing ring crush strength of paper and paperboards, and matched with YC303A crush tester and YC303A-1 RCT sample cutter.

Standard
1. (GB/T  2679.8   Method for Measuring Paper and Paperboard Ring Crush Strength)

Features
1. It has fine workmanship, and light and convenient use.
2. It has wide usable range, and thirteen 0.15 ~ 1.00mm central disks to fit test of paper samples with different thickness.

Parameters
1. central disks: 13 central disks with specification of 0.15mm ~ 1.00mm
2. Size of the packaging: 330mm×230mm×50mm
3. Weight: 2kg

CY303A-3 ECT sample cutter

Information
CY303-3 ECT sample cutter, an indispensable special sampling instrument for edge crush test and adhesive strength test of corrugated boards, can quickly and accurately cut the sample of given size, and is an ideal auxiliary appliance for departments of production, scientific research and quality supervision and inspection of corrugated boards and cartons.

Standard
1.(GB/T  6546   Corrugated Fiberboard-Determination of Edgewise Crush Resistance)

Features
1. the structure is simple, strong, beautiful appearance.
2. sets of double ball guide design, equipped with blades imported from Japan, sampling more effort and more accurate.

Parameters
1. Maximum Sample Width : 18 mm
2. Standard Sample Length: 100±0.5 mm; 80±0.5 mm
3. Standard Sample Width: 25±0.5mm
4. Overall Dimensions: 440mm×380mm×180mm
5. Weight: 19kg

CY303A-4 PAT clamps
Standard
1.(GB/T  6548   Corrugated Fiberboard-Determination of Ply Adhesive Strength)

Features
1. fine workmanship, the use of lightweight and convenient.
2. activity pins, the use of a wide range of adaptive testing with different types of corrugated samples.

Parameters
1. Pin: φ2mm , φ3mm
2. Base: 1
3. Gland: 4 A, B, C, D
4. Packing size: 200mm×190mm×50mm
5. Weight: 1kg

CY303A-5 FCT Sample Cutter             
Information
CY303A-5 FCT sample cutter, an indispensable special sampling instrument for flat crush test (FCT) of corrugated boards, can quickly and accurately cut the sample with specified area, and is an ideal auxiliary appliance for manufacturing enterprises and departments of scientific research and quality supervision and inspection of corrugated boards and cartons.

Standard
1.(GB/T  2679.6   Corrugating Medium-Determination of Flat Crush Resistance)

Features
1.compact structure, easy to carry.
2. the knife-edge sharp, rotary sampling, convenience sampling.

Parameters
main technical parameters:
1. the sampling area: 32.2cm2   (φ64 mm ± 0.2mm)
                   64.5cm2    (φ90.6 mm ± 0.5mm)
2. the maximum sample thickness: <15mm
3. Dimensions: 130mm×130mm×170mm
             150mm×150mm×170mm
4. Weight: 2.5kg
          3kg