RECI S4/W4 100W Glass CO2 Laser tube Laser Power Supply DY13

Model: HY-DY13

Match to RECI, Yongli, EFR 100W CO2 Laser tube and laser machine

Main features   

 

1) Good compatibility: It can be applicable to 80W laser tubes manufactured by different factories.

2) 2 Types can be selected:

Cutting type: Good power stability and strong adaptability;

Sculpture type: Fast response, Good engraving effect ,  it can prolongs the service life of laser tubesignificantly

Easy Control: High or low level all suitable
Open circuit protection Function: when the earth connection is under good situation,Power can be short time 

work in open state, it Can avoid the laser tube burst damage caused by laser power supply, prolong the laser
tube's service life.

One button to test the output laser manually.

Parameters

Type		HY-DY10	HY-DY13		HY-DY20
Input	Input voltage	AC220V or 110V(please specify when placing order)
	AC frequency	47-440HZ
	Max input power	450W	550W		1000W
	Max input current	5A	8A		10A
Output	Max output voltage	35KV	40KV		50KV
	Max output current	24mA	28mA		35mA
Efficiency	>=90%(full load)
MTBF(Mean time between failure)	>=10000hours
Response speed	<=1ms(from the TTL signal is given to the output current up to 90% of setting current)
Withstand voltage	Input-output,input-enclosure:AC1500V 10mA 60s,output cathode is connected with enclosure.
Environment	Operating temperature:-10~40degrees, relative humidity:<=90%
Cooling	Force air cooling(FAC)
Dimension	78*155*75	789161*247		79*200*290
Weight	1.75kg	2kg		3.14kg

Packing   

 

Carton box for single pc or double pcs and EPE Protection for whole laser power

Packing dimension: 35*24*17CM

Gross Weight: 2.3KG


Technical Support

 

1. All our item is pass the ISO9001 and CE quality Certification. 

2. We are the manufactory of the Co2 Laser Power Supply, and have strict quality control system, so that we cansupply the best quality products with lowest prices for our client. 

3. We have a professional technical support group for all the item selling. If you need any assistance on your 

item problem, please do not hesitate to contact us, our technical support will be there to assist you.  

4. Manual testing: Make sure the power supply and laser tube wiring correct firstly, offline the control line and 

then press the red button" TEST" to test laser tube out light or not, this method can be simple judgment power supply is working correctly.

 

Warranty

 

Whole Power Supply one year              

Free charge of the maintenance back to our factory (Besides shipment charge)

Free charge of accessories sending to your door (If broken by non-artificial factors within warranty)

24 hours online supporting technical service