Before the curing

Appearance	White paste
Relative density	1.60~1.70(g/cm3)
Surface drying time	≤15(min)

 

After the curing

Tensile strength	≥1.5(MPa)
Elongation At Break	≥150(%)
Shear strength	≥2.0(MPa)
Hardness	35~45(Shore A)
Temperature Range	-60~200(℃)
Volume resistivity	2.2×1015 (Ω·cm)
Dielectric strength	20 (kV/mm)
Thermal conductivity	≥0.8[W/(m·k)]
Dielectric constant	3.12(1.2MHz)

Packaging: 300mL / tube,25tubes / box.

NOTE

 

After operating, the rest of glue must be sealed to store , and tightened the cap immediately. when using it in the next time, if there is a little crust in sealed place, to remove it and it will not affect the normal application. the process of storage , the canal orifices may appear the phenomenon of the curing, to clean it then it can be used again, and the performance of product is not affected.