| Model Number: | MB-CA1000 |
|---|---|
| Brand Name: | MuxBOXS |
| Place of Origin: | China (Mainland) |
| Transmission Distance: | 3,250ft |
| Video Distance Adjustment: | Automatic Gain Control (AGG) |
| Protection: | 2KV |
Quick Details
Specifications
Overview
The Composite Video/Stereo Hi-Fi Audio active Receiver(MB-CA1000) ,that allows to receive one real-time Composite Video ,one Stereo Hi-Fi Audio via a single Cat5e/6 Cable up to 3,250 ft(1,000m) When used with MB-CVHFB Balun .The MB-CA1000 has a AGC function which means Composite Video can be automatically adjusted to best quality at different distance .it is built in surge suppressor to protect video and audio equipment against damaging voltage spikes .its integrated ground loop isolation prevents annoying "hum-bars" common noise with long distance installations .The Composite Video/Stereo Hi-Fi Audio active Receiver features full audio bandwidth response and best quality video for high fidelity audio-video applications .it works with MB-CVHFB Balun ,some of the applications are classroom video distribution ,commercial and home audio/video systems, hospital video training, video conferencing and so on.
Quick Setup Guide
Plug one side of the RCA cable(yellow ,white ,red) into RCA connectors (yellow, white ,Red)of the MB-CA1000 in order ,Attach other side of the RCA cable (yellow ,white ,red) to the display equipment and audio equipment in order ,Connect ground jack to the ground via a cable as short as possible .Insert one side of the CAT5e/6 cable into the ends of the Receiver and other side into the end of MB-CVHFB Balun .Attach the 5V DC power to the power jack of receiver . Make sure that the power led is on . You may use standard EIA 568A/B termination.
Specifications
|
Product Name |
1-CH Composite Video/ Stereo Hi-Fi Audio active Receiver |
|||
|
Devices |
DVD players, VCR, satellite receivers, MPEG players, laptops, notebooks ,monitors, DLP projectors, CCD cameras, video switchers, sequencers, digital video servers, video multiplexers, video splitters, video converters and other composite video equipment. |
|||
|
Transmission |
Transparent to the user. |
|||
|
Composite Video |
Audio |
|||
|
Bandwidth |
Video: 250 MHz, 3 dB roll off |
20 Hz to 20 KHz over the distance range |
||
|
Maximum Input |
1.1Vp-p |
1.1Vp-p |
||
|
Impedance |
75 ohms |
600 ohms min |
||
|
Video Distance Adjustment |
Automatic Gain Control (AGG) |
|||
|
LED Indicators |
Red |
|||
|
Power |
Power Range |
5V DC |
||
|
Power Consumption |
<750mW |
|||
|
Insertion Loss |
Less than 2 dB per pair over the frequency range from DC to 10MHz |
Less than 2 dB per pair over the frequency range |
||
|
Return Loss |
Better than 15 dB over the frequency range |
Better than 15 dB over the frequency range |
||
|
Common Mode Rejection Ratio |
Greater than 75 dB over the frequency range |
Greater than 40 dB over the frequency range |
||
|
Max. Distance Color via Cat 5E/6 UTP/STP Cable |
3250ft (1000 m) |
3,250 ft (1,000 m) |
||
|
Protection |
Input |
2KV(common mode), 10/700us IEC6100-4-5/1955(GB/T 1726, 5-1999) |
2KV(common mode), 10/700us IEC6100-4-5/1955 (GB/T 1726, 5-1999) |
|
|
Output |
2KV(different mode), 4KV(common mode), 10/700us IEC6100-4-5/1955(GB/T 1726, 5-1999) |
2KV(different mode), 4KV(common mode), 10/700us IEC6100-4-5/1955 (GB/T 1726, 5-1999) |
||
|
Pin Configuration (RJ45) |
Video: Pins 4(R) &5(T) |
Audio 1: Pins 1(R) & 2(T) Audio 2: Pins 7(R) & 8(T) |
||
|
Cable: Cat 5/5e/6 UTP/STP |
24 AWG or lower solid copper twisted pair wire Impedance: 100 ohms at 1 MHz Maximum capacitance: 20 pF/ft Attenuation: 6.6 dB/1,000 ft at 1 MHz |
|||
|
Connectors |
Three RCA-F connectors: Video (yellow) & stereo audio (red, white) One RJ45 for Cat 5E/6 |
|||
|
Temperature |
Operating: 0° to 55°C Storage: -20° to 85°C Humidity: Up to 95% non-condensing |
|||
|
Enclosure |
Aluminum alloy |
|||
|
Dimensions(packaging) |
mm (including one pair of Balun) |
|||
|
Weight(packaging) |
269g |
|||

