Model Number: | Focus Lens |
---|---|
Brand Name: | Hongyuan |
Place of Origin: | China (Mainland) |
Material: | ZnSe |
Diameter: | 18/19/20mm |
Focal Length: | 38.1/50.8/63.5/76.2mm |
Quick Details
Specifications
USA Material ZnSe focus lens for CO2 Laser Machine
Feature:
Ultra low absorption imported ZnSe Focus Lens
1. Ultra-low absorption, less heat
2. More stable Focusing spot, much faster cutting speed
3. Higher cost-efficiency, longer lifespan
Introduction
ZnSe has been made by means of import CVD from USA, and this material has low absorbance. The lens can can withstand high power density and the surface coating is solid , not easy to fall off and wipe-resistant. After AR-coating has been coated on double-side of imported ZnSe, the transmissivity of the wavelength 10.6um, which is commonly used in CO2 laser industry, can reach 99.5%. We have optimized the design from two sides - diffraction and aberration and have developed a series of products with the minimum actual focal spot diameter in the case of the same focal length. We can respectively design and produce the products according to different requirements of the customers for focus length, rear focus length, lens aperture, the diameter of the incident ray and so on.
Common processing requirements for the focus lenses.
Designed wavelength: 10.6um
Focus length tolerance: ±1%
Appearance tolerance: 0/-0.1mm
Thickness tolerance: ±0.1mm
Finish: 20-10
Eccentric: <3′
Effective aperture: >90%
Chamfer: <0.2×45°
Coating Film: 10.6um AR-coating
Application
Laser engraving ,cutting and marking etc.
leather, cloth, glass, acrylic, wood, double color board Metal ect.
Data
Service
1. There are strict procedures to test the lens and mirrors before delivery. So our products seldom have problems.
2. If some problems do happen, we need you give us some description of the problem, and then our technician will carry up with solution within 2 working days. Also pictures or video will be sent to help you. Most problems can be solved by this way easily.
Feature:
Ultra low absorption imported ZnSe Focus Lens
1. Ultra-low absorption, less heat
2. More stable Focusing spot, much faster cutting speed
3. Higher cost-efficiency, longer lifespan
Introduction
ZnSe has been made by means of import CVD from USA, and this material has low absorbance. The lens can can withstand high power density and the surface coating is solid , not easy to fall off and wipe-resistant. After AR-coating has been coated on double-side of imported ZnSe, the transmissivity of the wavelength 10.6um, which is commonly used in CO2 laser industry, can reach 99.5%. We have optimized the design from two sides - diffraction and aberration and have developed a series of products with the minimum actual focal spot diameter in the case of the same focal length. We can respectively design and produce the products according to different requirements of the customers for focus length, rear focus length, lens aperture, the diameter of the incident ray and so on.
Common processing requirements for the focus lenses.
Designed wavelength: 10.6um
Focus length tolerance: ±1%
Appearance tolerance: 0/-0.1mm
Thickness tolerance: ±0.1mm
Finish: 20-10
Eccentric: <3′
Effective aperture: >90%
Chamfer: <0.2×45°
Coating Film: 10.6um AR-coating
Application
Laser engraving ,cutting and marking etc.
leather, cloth, glass, acrylic, wood, double color board Metal ect.
Data
Diameter | Focal length(mm) | Structure | Material |
15mm | 38.1/50.8/63.5 |
Meniscus |
ZnSe |
18mm | 38.1/50.8/63.5/76.2 | ||
19.05mm | 38.1/50.8/63.5/76.2 | ||
20mm | 38.1/50.8/63.5/76.2/101.6 | ||
25mm | 38.1/50.8/63.5/76.2/101.6/127 |
Service
1. There are strict procedures to test the lens and mirrors before delivery. So our products seldom have problems.
2. If some problems do happen, we need you give us some description of the problem, and then our technician will carry up with solution within 2 working days. Also pictures or video will be sent to help you. Most problems can be solved by this way easily.