RECI DY10/DY13 80W/100W CO2 Laser Power Supply Flyback Coils Transformer


Application

1.The 80w flyback transformer used in the Co2 laser power supply/laser engrave machine.

2.The 80w flyback transformer only suitable for 80W Co2 laser power supply.

3.The 80w laser power supply has 2 piece/one pair flyback transformer. so you must choose 2 piece/(one pair ) for your laser power.

4.please check the install schematic diagram.

5.The screw is for install fixed on the laser power box.

6.If the laser engrave machine no laser beam come out, Then you need replace a new flyback transformer for the laser power.

7.If the Co2 laser engrave machine laser power is weak, and it can't cut thought any materials .then you can adjust the laser power to maximum value . at the same time, you check the machine ampere. If the Am indicator is still less than 8 Am .you need replace a new flyback transformer for the laser power supply.



Notes

There are TWO pieces of 80W/100W high voltage flyback transformers in 100W CO2 laser power supply.

There are THREE pieces of 150W high voltage flyback transformers in 150W CO2 laser power supply.