MPORTANT USER INSTRUCTIONS

1. Product is intended for institutional use and for indoor use only.

2. Turn power switches off before plugging indevices or unplugging cabinet.

3. Do not plug cabinet in if the switches orpower cord have been damaged. Do not plug power cords into another extension cord or re-located power tap. User can plug in 20 devices at once.

4. Do not block the ventilation holes on the cabinet. Proper airflow is required for safe operation of equipment.

5. Cabinet with devices should be kept in a room with a maximum temperature not to exceed77℉or 25℃.

6. Be sure to turn power switches off and unplug cabinet before moving.

7. Ensure casters are locked before opening cabinet doors.

8. Maximum weight of accessories on top of cabinet is 25 pounds. NO TV/Monitor to be used on top of cabinet.

9. Avoid loading equipment in the cabinet inan uneven fashion, which may cause a hazardous condition.

10. Maximum weight for front shelves is 9 lbs, per shelf.

11. Maximum weight for rear shelves is 1 lb. per shelf.

WARNING

1. Relocating audio and or video equipment to furniture not specifically designed to support audio or video equipment may result in death\ or serious injury due to the furnishing collapsing or over turning onto a children.

2. Deathor serious injury may occur when children climb on audio or video equipment furniture. A remote control or toys placed on the furnishing may encourage a child to climb on the furnishing and as a result the furnishing may tip over onto the child.

TECHNICAL SPECIFICATIONS

1. CAPACITY : 20 Devices

2. COMPATIBILIT :Designed for MAC Devices

3. UNIT DIMENSIONS : 40.25" W×24" D×45.5" H

4. SLOT DIMENSIONS : 9.25" W×8" D×2.75" H

5. WEIGHT (WITHOUT DEVICES) : 275 lbs.  

GENERAL USE

PoweringThe Cabinet

Each  MAC charging cabinet comes with two power management units and two 9'power cords. To power the MAC charging cabinet:

1. Plug the IEC end of each power cords into one of the power management units on the lower right side of the cabinet

2. Plug the other end of each power cord into one of the standard outlets dedicated to this cabinet.

3. Turn both power switches to the on position; the cabinet is now powered.

ConnectingThe Devices

The MAC charging cabinet comes pre-wired with 20 85W MagSafe 2 power adapters, ready to connect your devices. To connect each device:

1. Place each device into one of the 20 storage slots in the front of the cabinet.

2. The MagSafe 2 cables are secured in the center foam dividers; take the connector closest to each device and connect on the underside of the device.

3. When not charging ,secure the MagSafe 2 cable in the management solt and circular cut out located in the center foam divider.