1HP/750W CPM158 Centrifugal Water Pump
 
1. Working conditions:
Max temperature of fluid up to:      80℃
Max ambient temperature up to:        40℃
Max Pressure:                       10bar
2. Structural characteristics:
Pump casing:           Cast iron
Impeller:               Brass
Motor housing:         Aluminum
Mechanical seal:        Stainless steel(graphite to ceramic)
Shaft:                 45# steel or stainless iron
Bearing:               SKF/NTN/NSK/China
Insulation class:        B and F
Protection class:        IP44 and IP54

 
INSTALLATION AND APPLICATIONS 
These pumps are suitable for pumping clean water and fluids which are not chemically aggressive to the pump components. They are extremely reliable,economical and simple to use,being particularly suitable for domestic applications such as the automatic distribution of water from small and medium-sized surge tanks, watering gardens,etc .These pumps should be installed in a covered area,protected against the weather. N.B.it is always advisable to install a foot valve or a non-return valve on the suction opening.