Product: 6-s shaking table

Product classification: In terms of the support structure, 6-s shaking table can be divided into fixed shaking table, small channel steel and support frame shaking table, and big channel steel and support frame shaking table. The small channel steel and support frame table is cost-effective, and its performance is stable. The big channel steel and support frame is easily instilled, its operation is stable and reliable, so it is suitable for the mineral separation of loose soil.

Product structure: the 6-s shaking table is mainly consisted of bed surface, transmission mechanism, water discharge trough, and adjustable slope device.

Application: the 6-s shaking table is widely used to separate tungsten, tantalum, tantalum, niobium, gold, iron, manganese, titanium, chromium, bismuth, plum bum and other non-ferrous metal, black metal and nonmetal mine. It can also be used to separate some non-metallic mineral such as barytes and coal.

Adaptive granularity: the adaptive granularity of 6-s shaking table respectively is: coarse ore (2-0.5mm), fine sand(0.5-0.074mm), slurry (  <0.074mm)

Name			Unit	Grit concentrate table	Fine sand concentrate table	Sludge concentrate table
Dimension	Length		mm	4500	4500	4500
	Driving part width		mm	1850	1850	1850
	Concentrate part width		mm	1500	1500	1500
Max feeding size			m	2	0.5	0.15
Feeding amount			t/d	30-60	10-20	15-25
Feeding thickness			%	25-30	20-25	15-25
Journey			mm	16-22	11-16	8-16
Frequency			f	48-48	18-53	50-57
Surface/deck of the table		Water quantity	t/d	80-150	30-60	10-17
		Horizontal obliquity	degree	2°30-4°30	1°30-3°30	1°-2°
		Portrait obliquity	%	1.4	0.92	------------
		Table board corner	degree	32°-42°	40°	42°
Concentrating square			cubic meter	7.6	7.6	7.6
Motor power			kw	1.1	1.1	1.1
Transmission mechanism			Eccentric rod gear

Product's advantages: the 6-s shaking can be applied to rough concentrate, grinding re-concentrate, scavenging concentrate and so on. It can get the final concentrate once for all.

Operation principle: the separation is operating on the slant bed surface with riffle. The ore particle enters from feed chute, at the same time the feed chute provide lateral flush water, so with the gravity of ore particle, the impulsive force of lateral flush water, and the inertia and force of friction produced by the asymmetric reciprocating motion of the bed surface, the ore particles are separated according to its sizes and densities, then move laterally with the bed surface and longitudinally with the diagonal.. As the ore particles of different sizes and densities spread like a fan-shape in its own directions respectively ,and are discharged from the concentrate side and tailing side, finally they are separated into concentrate, medium concentrate and tailing. As is shown below:

Parameter:

Classification of table surface: according to the quantity and form of riffles, the table surface are divided into: 46 groove, 60 groove with straight slot, 60 groove with single wave, 60 groove with double wave,90 groove with straight slot,90 groove with double wave, 110 groove, 120 groove with straight slot, 120 groove II segment, 120 groove III segment, 138 groove with straight slot, and micro-fine particle groove surface/deck. The specific parameter is as below:

Classification of deck/table surface	application	adaptive granularity	Capacity (t/h)
46 groove	Crude ore	35-60	1.5
60 groove with straight slot	Rough concentration	60-80	1
60 groove with single wave
60 groove with double wave
90 groove with straight slot	Medium and rough concentration	80-100	0.8
90 groove with double wave
110 groove	Fine grinding-reconcentration	100-120	0.6
120 groove with straight slot		120-150	0.5
120 groove II segment
120 groove III segment
138 groove with straight slot	Super fine grinding-reconentration	150-180	0.5
micro-fine particle groove		180-250	0.5

 

Buying guide:6-s shaking table has two types-left type shaking table and right type shaking table.

Left type shaking table: the worker stands in the position of the transmission mechanism (the headboard), facing the concentrate discharging side, and the feed side is on the left.

Right type shaking table: the worker stands in the position of the transmission mechanism (the headboard), facing the concentrate discharging side, and the feed side is on the right.

Before place your order, please check your mine field location to choose the suitable shaking table, or we will just deliver the right type shaking table.