1.Product Introduction

      The X-Detector VR8000 Ultrasonic Long Range King is an advanced Metal Detector System utilizing advanced FORWARD GAUSS technology that is both an audio and visual detector.

      This metal detector was first used in the field in 1984 and the FORWARD GAUSS technology that it uses has proven to be (by far) the most successful.

      This system was originally developed for professional archaeologists and treasure hunters and has been used both on land and under water. With the development of faster and more complex processing units and a reduction in the cost of materials, we were able to begin offering this breakthrough technology to the general public at a much more affordable cost. Part of the success of this metal detector system is that it does not look like a standard metal detector. Instead, it has the appearance of a fine, well manufactured piece of scientific equipment that one might expect to find at an archaeological site.

      The X-Detector VR8000 Long Range King is custom built in a sturdy, hard side, padded case with two locks. The transmitter is case mounted and includes the Standard Six elements with selector switch. The system includes an installed, rechargeable gel cell battery with charger, transmitting antenna, receiving rods and receiver with belt clip, headphones and user manual all inserted into the specially fitted case.

2.1 Select depth and range by users, very convenient to adjust depth according to practical situations.

2.2 Accurately pinpointing gold, diamond deposit, even for a small size nugget.

2.3 Professional treasure hunter, high performance in anti-interference.

2.4 Only for gold (if you set the machine for gold), just move switch to Gold, then you can start your detection.

2.5 Two locks, prevent from being damaged and stolen.

2.6 Easy operation, English operation panel and manual.

2.7 Easy to carry, put all parts into an Aluminum box. Unit weight: 8kg including monitor and accessories.

2.8 Rechargeable battery, charge the machine 12h at the first time, please.

3.Components

3.1 A grey case with aluminum trim, a handle and two locks

3.2 External Battery Port

3.3 The Belt Receiver

3.4 Head Phones

3.5 Receiving Rods

3.6 Battery Charger, AC/DC adapter, input AC 115V, output DC 9V 

3.7 Marker Flags

3.8 Operators Manual

4.Specification

4.1 Max Detection: 80m

4.2 Detect Range: 100-2000m

4.3 Rechargeable Battery: Continuous working 48 hours , Power: 850mA

4.4 Frequency: 433Mhz+/-150Khz

4.5 Inner Storage: EEPROM 16k*8Bit

4.6 Voltage: 9~12VDC

4.7 Temperature Range: -40~85

4.8 Operating Humidity: 0~95% (non-condensing) , Ultrasonic Frequency: 400-3000Mhz+/-150Khz

4.9 Weight: 14LBS