Company Index on m.ecvv.com

Quick Details

Usage:	Car Paint
Main Raw Material:

Specifications

Product Name/Model:

Characteristic: Multi-purpose two-component 2K Primer Surfacer with strong filling power and fine adhesion between coats, fast drying time, easy sanded.

Substrates	Dried and sanded existing finishes, all kinds of primer and putty.
Surface Cleaning	Wash by warm soap, remove wax, silicon and other contaminations with degreaser, sanding with P800-P1000, wash with clean water then keep dry; again with degreaser.
Mixing Ratio	MF606-2K Primer Surfacer	MF106 2K Primer Hardener	Thinner
Mixing Ratio	4	1	1~1.5
＜15℃	MF606 2K Primer Surfacer	MF106 2K Primer Hardener	60 Fast Thinner
15-30℃	MF606 2K Primer Surfacer	MF106 2K Primer Hardener	61 Standard Thinner
＞30℃	MF606 2K Primer Surfacer	MF106 2K Primer Hardener	63 Slow Thinner
Pot-Life	At 20°C, 3 hours mixed with hardener, thinner
Spray Viscosity	14-16s to drop off, in 4# viscosity cup at 25°C,
Spray Gun Set Up	Gravity Feed: 1.2-1.5mm 4-5kg/cm 2 Suction Feed: 1.4-1.6mm 4-5kg/cm 2
Spray Technology	Coats&Thickness: 2-3 coats, total 20-30um. Flash-Off Time: At 25°C, 5-10 minutes between two coats,it depends on temperature and paint film.
Drying Time	A. Allow 10-20 minutes air-drying,then 60°C baking 20 minutes, can sand after cool down. B. Air-drying time 3 hours, at 20°C.
Shelf Life	2 years in original sealed can, cool and dry place at 25℃.
Package	1L×12 or 3.75L×4

Note:
1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.
2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner to avoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.
3. The products mixed with hardener should be used up soon and can not be restore for future use;clean equipments immediately with thinner after application, otherwise it is very difficult to be cleaned after dry.