Company Index on m.ecvv.com

Quick Details

Usage:	Car Paint
Main Raw Material:

Specifications

Characteristic: Extra fast drying clear coate, high gloss and hardness, easy application, low consumption and high efficiency to ensure good profit, suitable for fast spots repair.

Substrates	1K Basecoat.
Mixing Ratio	Clear Coat		Hardener		Thinner
	2		1		0.1~0.3
＜25℃	680 Extra Fast Drying Clear Coat		681 Extra Fast Dry Hardener		62 Fast Thinner
Spray Viscosity	14-16s to drop off, in 4# viscosity cup at 25°C,
Pot-Life	At 25°C, 1.5 hour.
Re-Treatment	There are particles or runs after spray, sand affected area with P2000 sand paper after thorough drying, then polish to solve the problem.
Spray Gun Set Up	Gravity Feed: 1.2-1.5mm 4-5kg/cm 2 Suction Feed: 1.4-1.6mm 4-5kg/cm2
Spray Technology	Coats&Thickness: 2-3 coats, total 25-35um Flash-Off Time: At 25°C, 5-10 minutes between two coats, Air-Drying Time: Allow 10-15 minutes air drying time before force drying
Drying Time	Temperature	Dust Free	Tack Free	Dry to Handle	Dry to Test
	25°C	15 minutes	2 hours	4 hours	5 days
	70°C	3 minutes	10 minutes	15 minutes	45 minutes
Shelf Life	2 years in original sealed can, cool and dry place at 20℃.
Package	5L×4 or 2.5L×8 or 5L+2.5L+1L

Note:
1. This products are extra fast reaction, after mixing clear coat with hardener, just add small quantity of thinner for spraying, the mixture should be used up within 1 hour.
2. The spray viscosity could not be too high, in case of paints defects, such as orange skin.
3. This product is suitable for spots repairs, not suitable for overall repair.
4. At temperature lower than 8°C, a forced dry by baking is recommended.
5. It is recommended to apply at conditions of temperature lower than 25°C and humidity lower than 80%, otherwise there will be defects such as blistering or blushing.
6. The products mixed with hardener should be used up soon and can not be restore for future use; clean equipments immediately with thinner after application, otherwise it is very difficult to be cleaned after dry.