| Warranty: | 1Years |
|---|---|
| Model Number: | GL500 |
| Brand Name: | Queclink |
| Place of Origin: | China (Mainland) |
| Use: | Automotive |
| Type: | Gps Tracker |
Quick Details
Specifications
Product Description:
Interfaces
General Specifications
Air Interface Protocol
Note:Customers use this product for the first time, need to purchase a configuration cable
The GL500 is a powerful GPS tracker designed for fixed asset tracking applications. It is powered by two user replaceable CR123A lithium batteries. Configuration allows it to wake up on a preset schedule to check if it needs to shift from dormant to active status and/or send update of its current location, then returning to a dormant state. Optimally configured, it will operate autonomously for 1000 days. Its built-in 3-axis accelerometer allows the GL500 to detect asset movement and transmit an alert message. The integrated @Track interface protocol allows the GL500 to communicate with a customer mobile phone or a backend server via GPRS/SMS and transfer reports of GPS position, etc. System integrators can easily incorporate the GL500 into existing tracking systems based on this full featured protocol. Features:
- Low power consumption, long standby time for more than 1000 days
- Powered by two user replaceable lithium batteries (CR123A)
- Internal u-blox chipset
- Quad band GSM/GPRS 850/900/1800/1900 MHz
- Embedded @Track protocol
- Internal 3-axis accelerometer for motion detection
- Internal GSM antenna
- Internal GPS antenna
- Internal microphone (optional)
- CE/FCC certified
Specification:
GSM Specifications
|
Frequency |
Quad band: 850/900/1800/1900 MHz Compliant to GSM phase 2/2+ -Class 4 (2W @ 850/900 MHz) -Class 1 (1W @ 1800/1900 MHz) |
|
GPRS |
GPRS multi-slot class 10 GPRS mobile station class B |
|
RMS Phase Error |
5 deg |
|
Max Out RF Power |
GSM850/GSM900: 33.0±2 dBm DCS/PCS: 30.0±2 dBm |
|
Dynamic Input Range |
-15 ~ -108 dBm |
|
Receiver Sensitivity |
Class 2 RBER 2% (-107 dBm) |
|
Stability Of Frequency |
< 2.5 ppm |
|
Max Frequency Error |
±0.1 ppm |
GPS Specifications
| GPS Chipset | 50-channel u-blox All-In-One GPS receiver |
| Sensitivity |
Autonomous: -147 dBm Hot start: -156 dBm Reacquisition: -160 dBm Tracking: -162 dBm |
| Position Accuracy (CEP) |
Autonomous: < 2.5m SBAS: < 2.0m |
| TTFF (Open Sky) |
Cold start: 27s average Warm start: 27s average Hot start: 1s average |
| Audio | Internal microphone |
| GSM Antenna | Internal only |
| Internal Indicator LED | GSM, GPS and battery status |
| Serial Port | Internal 8 pin connector for upgrading or debugging |
| Dimensions | 80mm*58mm*26.8mm |
| Weight | 65g (without batteries) |
| Batteries | Two CR123A lithium batteries 1500 mAh |
| Standby Time |
Standby current: < 10 uA SMS count: 1000 SMS SMS reporting standby: One SMS report per day: 1000 days TCP reporting standby: One report per day: 950 days Four reports per day: 248 days Five minutes reporting: 4 days |
| Operating Temperature | 20 ~ +60 |
| Command Set |
@Track protocol command Simple SMS command |
| Transmit Protocol | TCP, UDP, SMS |
| Working Mode |
Power save mode, for long standby time Continuous mode, for emergency tracking |
| Scheduled Timing Report | Report position and status according to preset time schedules |
| Geo-fence | Support up to 5 internal geo-fence regions |
| Low Power Alarm | Alarm when internal battery is low |
| Motion Detection | Motion alarm trigger and optional change of working mode |
| Wakeup Report | Report when the device wakes up |
| Listening Mode | Incoming/outgoing call with white list support |
Note:Customers use this product for the first time, need to purchase a configuration cable