1.What is oxyhydrogen generator? 

 

HHO generator consumes water and electricity, electrolyze water into hydrogen gas and oxygen gas. Due to high-efficiency and high temperature of mixed hho gas, it is widely used in welding, cutting, polishing, heating and carbon steel cutting industry etc. Use H2 and O2 as source of flame to replace LPG, propane, acetylene fuel or natural gas or other fuel. 

Applications:

1). Jewelry welding;

2). Acrylic polishing(15mm);

3). Platinum resistor welding;

4). Varnished wire welding;

5). Waxy film repair;

6). Thermocouple welding, quartz glass tube

sealing, water injection wire drawing sealing;

7). Copper pipe welding;

8). Musical instrument welding;

9). Storage battery welding;

10). Decorative lighting welding etc.

Specification: 

1). Energy-saving.

2). Environment-friendly.

3). 100% safe.

4). Save time & money.

5). ISO9001,CE etc

Model: HHO-60; HHO-100; HHO-200; HHO-300; HHO-400; HHO-600.

 

2. Cutting:

What is advantage of oxyhydrogen generator in carbon steel cutting industry?

1). Effective and fast. Oxyhydrogen generator can be used cutting 50mm-300mm carbon steel, punching 15mm-90mm carbon steel. 
2).Energy-saving. Oil saving 20%, energy saving 40%. Consume water and electricity, electrolyze water into hydrogen gas and oxygen gas. Use H2 and O2 as source of flame to replace LPG, propane, acetylene fuel or natural gas or other fuel. 
3).Environment-friendly. Consumption of water, produce of water. Compared with traditional fuel, it is more beneficial to the environment and human.
4).Safety. Because the density of hydrogen is small, will not assembled on the ground, so there is no risk of explosion. 
5.Save time&money. The temperature of the oxyhydrogen flame is up to 2800 degree, and the flame is more concentrated. Compared with conventional fuel, it can greatly save time and cost.
6).CE, ISO9001.

Specification:

1).Effective and fast
2).Energy-saving
3).Environment-friendly
4).Safety.
5).CE, ISO9001.

Model: HHO-300-G; HHO-600-G; HHO-1000; HHO-1500; HHO-2500; HHO-4500; HHO-6500; HHO-9500.

3. Carbon Cleaning Machine:

HHO Generator engine carbon cleaning machine by electrolyzing water into hydrogen and oxygen gas, then suck the mixed gas into the engine by air intake. Due to the high temperature of HHO gas, through the burning of HHO gas mixed with fuel to clean the accumulated carbon deposition in the engine.

Specification:

1). Clean the carbon deposition in the engine

2). Improve the horsepower of car

3). Reduce emission

4). Saving time and cost

5). ISO9001, CE

Why should do carbon cleaning for car?

There are many reasons for increased carbon deposition: incomplete combustion, poor quality fuel, bad driving habit, long time lower speed, poor air quality etc. With the increase of carbon deposition, will cause to difficult cold start, unstable idle speed, accelerating weakness, fuel consumption increased, excessive exhaust, engine knock etc. 

What kind of car can use HHO engine carbon cleaning machine?

The model: motorcycle, car, bus, truck etc.

The brand: All brand of car, motorcycle, bus, truck. Such as BMW, BENZ, HYUNDAI, TOYOTA, HONDA etc. 

What HHO engine carbon cleaning service can bring for customer?

1). Maximize Fuel Efficiency

2). Save Energy and Oil, Eliminate Carbon Deposits, Enjoy Low-Carbon Life

3). Resume Horsepower and Torque

4).Extend Drivetrain Service Life

5).Reduce Harmful Emissions, Safety and environmental protection

6).Auto repair the oxygen sensor and ternary catalyst, prolong engine life .

7). Increase Governmental Test Passing Rate

8). Better for increasing satisfaction of customers.

9). Newest technologies, Quality Guarantee, Better Cleaning!

Model: CCM300; CCM600; CCM1500; CCM3000; CCM4500.