Kaifeng Rainbow Machinery Co., ltd
Blade Type Motor Driven Wood Crusher

General introduction of wood crusher

Such machine also called wood shredder,wood shredding machine.This is an Excellence machine to makes the wood into the wood powder,it can make the different raw material such as wood ,branch .the machine can crushing them into the sawdust one time ,it has features of low investment,low consumption,high crushing ratio with high economic effectiveness

Features of wood crusher

1.easy operation and high crushing ratio

2.Continually crushing the raw material

3.Strong structure with low price

4.Easily moving. Easy for the outdoors manufacturing .

5.Different final size(can be adjust according to your requirements)

Maintaining of Wood Crusher

1.because of long time wok, the bearings in the spindle need add butter. Works much longer, need add more butter. Or the bearings will be heated and then damaged which will influence the normal operation.

2.After long time work, the blades will get blunt. This time need disboard them and sharpen them with sharpener or stone by hand until them get sharped. If the blades are not sharp, this will influence capacity

and also damage machine easily.

3.The V-belt needs to adjust degree of tightness after using a time. Press the middle of the belt with finger to fall 6-10mm.

4.Everyday when finished work, should clean the machine and check whether the machine is lose to increase

service life.

Working Principles of Wood Crusher

It uses blades to cutting and high speed airflow to reduce the wood into sawdust and granular with different fineness. While the blades inside are cutting with a high rotating speed, the rotor generates strong airflow which rotates st the same direction as rotor. As the blades rotate and cut, the airflow crushes the material at the same time. In this way, the speed of sawdust output can be increased.

Parameter of wood crusher

Model	knife-Dia (mm)	Input  opener (mm)	Input size  (mm)	Sieve pore  (mm)	Power  (KW)	Capacity  T/H
RBWD600	600	500*250	10-40	6mm	18.5	0.2-0.5
RBWD700	700	600*300	10-40	6mm	22	0.3-0.8
RBWD800	800	750*350	10-40	6mm	37	0.5-0.9
RBWD1000	1000	1000*380	10-40	6mm	90	1.2-2