1) according to the operation function, select the electric vehicle
Electric stacker of the basic operating functions are divided into horizontal conveying and stacking / pick up, loading / unloading and sorting. According to the enterprise to achieve the operating function can be determined from the company's products in the series. In addition, special operations will affect to the heap of the car is high specific configuration, such as handling is roll and molten iron, high car pile installation is to perform a specific function.
(2) according to the requirements of the operation of the choice of electric pile high car
Operational requirements include general tray or specification of goods, lifting height, operating channel width, gradeability requirement, but also need to consider the work habits (such as used car or driving), operation efficiency the efficiency of different models of different aspects of requirements.
(3) according to the operation environment, choose the electric vehicle
If the enterprise needs to carry goods or warehouse environment noise and other environmental aspects of the requirements, in the choice of models and configuration should be considered. If it is in the cold storage or in the explosion-proof requirements of the environment, the stack of high car configuration should also be cold storage type or explosion-proof type. Carefully examine the stacker operation process, need to go through the place, conceive the possibility of a problem, for example, storage door high car pile high would affect; in and out of the elevator, the lift height and the bearing of car pile high; in the upstairs floor bearing whether meet the corresponding requirements. Finally, an integrated consider the final electric reactor high car models and technical parameters of all decisions. [1]
Common category editor
1, tray type pile high car, piled high car bottom legs, suitable for single pallet GB or without pallets of goods loading and unloading transshipment, characteristic price is cheaper.
2, wide leg pile high car, pile high front legs wide. In general, the width of 550/680mm, wide leg can be achieved 1200/1500mm, width of double side loading and unloading tray (double-sided tray length less than, limited to the), the advantage of the price moderate, can solve double-sided tray or some special goods
Electric forklift truck
Electric forklift truck
Requirements.
3, balance weight type pile high car, piled high car without legs, piled high car and counterweight block, fork may be appropriate to forward and backward, to ensure the goods shovel level. Advantages: wide wide, similar to the traditional internal combustion forklift; disadvantages: vehicle long heavy, for channel spacing requirements are relatively high, and higher prices.
4, forward type pile high car, similar to the basic aspects and the balance weight type, without a front bottom leg weight, is the car the fork and the door frame can be backward and forward move a certain distance, general is 560mm. This reduce the amount of high car pile length, the channel requirements have a certain ease, equilibrium price re pile high car of similar.
5, all stainless steel high car, the whole vehicle to stainless steel for materials production, suitable for high environmental health requirements of places, such as food, medicine and so on, the price is slightly higher.
6, riot trucks, is a special model, there is a mandatory production licensing requirements, applicable to the higher security requirements, high prices, high technical requirements, the high level of anti riot vehicles have riot rating.
7, lateral car pile high, stacker fork mounted on the side, the side loading and unloading operations, mainly to solve the channel where a small, the general mode of production is to install side shift is, but normal mode of production is integrated side shift fork, the author has in Germany show seen like models, $100 million dollars.
8, single column reactor high car, namely in the form of traditional gantry lifting, instead of single rod lifting, the lifting speed on both sides of the limitations of parallel, stable uniform and general transmission also from the chain type change driving belt, so that uniform lifting.
Above models for market commonly used models, of course, heap car high classification there are many, especially some non-standard type car pile high, a wide variety, not to enumerate, but generally speaking typical classification, the difference is the larger of the several models, other non-standard piled high car is generally the models as the basis, modify different parts for special can be.
Maintenance editor
After a week of high electric vehicle operation, the efficiency, life and safety of the electric forklift truck will depend on the daily maintenance.
1, the maintenance of the safety rules
(1) to maintain the cleanliness and sanitation of the maintenance site.
(2) do not take loose items or valuables when maintenance.
Be careful!
To repair the electric system of the electric vehicle, if the metal is exposed to the electronic components, it is easy to cause a short circuit or combustion. So please take off your watches, earrings, or other accessories.
(3) before the electric forklift truck repair, unplug the power outlet, disconnect the power supply.
(4) the key switch of the forklift should be closed before opening the left and right box cover or the electric system.
(5) before checking the hydraulic system, the fork should be reduced and the system pressure should be released.
(6) check the body leakage situation, please do not wipe paper or cardboard, direct contact by hand. So as not to burn.
(7) please note transmission device or a hydraulic system oil temperature may be higher, should first make electric stacker cooling and then replace the gear oil or hydraulic oil, to prevent the oil temperature as a result of the high combustion.
(8) the hydraulic system should be filled with new clean oil.
Be careful!
If the hydraulic oil is not clean, it will affect the precision of the hydraulic components, so that the entire hydraulic system ability to reduce.
If the use of different grades of hydraulic oil, the damage to the hydraulic components, but also affect the ability of the system. So, when adding or replacing the hydraulic oil, pay attention to the use of a unified brand.
(9) to comply with the relevant laws and regulations, to protect the environment, according to the provisions of the storage and discharge of oil, do not be discharged into the sewer.
(10) car body welding, to disconnect the battery power supply. Because welding