Chinacoal13

Factory selling intelligent ultrasonic thickness detector

Ultrasonic Thickness Gauge 310 is a new generation of intelligent ultrasonic thickness gauge, using the latest high performance and low power consumption microprocessor technology, based on the principle of ultrasonic measurement, to measure the thickness of metal, glass, ceramics and other materials, and the materials of sound velocity measurement. Is widely used in all kinds of plate, pipe wall thickness, the boiler container wall thickness, all kinds of pipeline and pressure vessel, thickness measurement, monitor them in the process of using the degree of corrosion after thinning.

Main function:

1. Suitable for measuring metal (such as steel, cast iron, aluminum, copper, etc.), plastic, ceramic, glass, glass fiber and other any good conductors of ultrasonic thickness.

2. Can be equipped with a variety of different frequency, chip size, double crystal probe use.

3. Have probe zero calibration, a two-point calibration function, can be automatically on system error correction.

4.  Thickness can be known the sound velocity measurement, in order to improve the accuracy of measurement.

With functions of coupling status alerts.

5. LED backlight display, convenient to use in dark environment.

6. The battery indicator function, can real-time display the battery remaining power.

 With automatic power saving function dormancy, automatic shutdown, etc.

7. Small, portable, high reliability, suitable for bad operating environment, vibration, impact resistance and electromagnetic interference.

Technology Parameter:

Measuring range:	0.75mm~300.0mm(0.03inch~11.8inch)
Units:	Metric/Imperial unit seletable
Sound Velocity Range:	1000m/s~9999m/s(0.039~0.394in/μs
Display resolution:	0.01mm or 0.1mm(lower than 100.0mm) 0.1mm(more than 99.99mm)
Accuracy:	±(0.5%Thickness+0.04)mm,depends on Materials and conditions
Data Memory:	5 files(up to 100 values for each file)of stored values 5 Sound Velocity of stored values
Power Source:	2pcs 1.5V AA size,batteries.100 hours typical operating time(LED backlight off)
Outline Dimensions:	150mm*74mm*32mm
Workpiece surface temperature:	- 10 ~ 60 ℃
The minimum thickness value capture capacity	With a minimum thickness value capture capacity
Standard configuration	NDT310 host, 5MHz probe, 4 mm steel calibration block, coupling agent, 2 batteries (non - Aviation)
Measurement cycle:	4 times/SEC, scanning of single point measurement model 20 times per second.
Weight:	238 g
Power source:	Type AA alkaline battery 1.5 V (2)
Optional attachments:	2 MHZ, 7 MHZ and 5 MHZ (high temperature)

Application:

Various parts of instruments, to provide fast, accurate measurement of the plate and the parts processing table. Another important application of this watch is monitoring the production equipment of all kinds of piping and pressure vessel, in the use of monitor to the refinement degree. Can be widely used in petroleum, chemical, metallurgy, shipbuilding, aviation, aerospace and other fields.