Xhorse VVDI MB BGA TooL VVDI Key Programmer For Benz

Xhorse V2.1.1 VVDI Benz VVDI MB TOOL Key Programmer Including BGA Calculation

Latest Version: V2.1.1

Support Key Types: 1997-2000 705 Moto, 2001-2005 Nec, 2006-2010 NEC, 2011-BGA.

Xhorse VVDI MB BGA TOOL Function Introduction:

1. Support BE key, read password and prepare new key via IR.
2. NEC V051, V057 support on board get password
3. All NEC keys support on board write and erase
4. Password calculate:support BGA keys, NEC keys(include 51, 57version)etc., work fast.
5. Support renew EIS and ELV
6. Support write EIS and ELV
7. Support online generate key file
8. Unlock ELV function will be released soon.
9. Renew other control modules function will support soon

Notice:

1. It Supports Password Calculator Function. Each time will cost 44.99USD. It takes 4 minutes to collect data, and 2 minutes to calculate.
2. Not Support All Key Lost
3. On March 2nd, VVDI MB Tool add these two cables: Gear lever ECU Refresh Diagnostic Cable and Gearbox ECU Refresh Diagnostic Cable

VVDI For Benz BGA Tool Customer Feedback:

1. I test password from 212 new model super

good tool need pay 2 tokens
need 10 min all ok

2. Do you have see video of this tool?

They say can do all key lost on w212.
No tool can do it even Mehaco or nec pro51.
w212 eis on video, sure it can.. mehaco/mercedesinstrument can do all keys lost on w212.. the option is availible a few months.

Latest Technical Details:

VVDI MB BGA tool update goes well, the following workable models are for reference only.

Model Support IR/OBD:

W164, W164 2009+
A166, W197, W212, W218, A246
A169, W209, W211
W172, W204, A207
W203
W204, W207, W212 only by dump
W209 only by dump
W210
W215, W220
W230
W216
W221
W906

Keys Version Supported:

v03, v06, v08
v05, v07, v09
v59, v61

VVDI MB BGA TooL Package List:

1. VVDI-MB TOOL device
2. IR adaptor
3. USB cable
4. NEC adaptor 1
5. NEC adaptor 2
6. NEC adaptor base PCB
7. K Line in OBD line
8. OBD line

VVDI MB BGA TooL FAQ:

Q: I test read data with obd2 210 k line working and 204 car read with obd 2, but 211 not read with obd2 cable connect
16 12v
4+5 GND
14 CAN_L
6 CAN_H
pin 1 : ESL 1
pin 2 : GND
pin 3 : +12V (30)
pin 5 : CAN L (White)
pin 6 : CAN H (Green)
pin 7 : CAN L
pin 8 : CAN H
Can any one test?

A: Read eis via obd for W164, W169, W211, W209, require gateway connected