Product description

Polyvae? YT-8012 is a copolymer powder of vinyl acetate and ethylene which is easy dispersible in water and has good saponification resistance. and it also has a wide range of usage.           

Suggest Applications	Suitability
Flexible thin-bed mortars Tile grouts/joint fillers	●
Tile adhesive(C1/C1S1/C2)	●●●
Skim Coat/ Wall putty (Indoor/outdoor)	●●●
Plasters/ Renders	●●●
Troweling compounds for Floor/wall	●●●
Gypsum based mortars	●●●
Self-leveling dry mixed mortars	●
●●●  Highly recommended     ●●    Recommended       ●    Suitable

Properties

Ready-mixed mortars modified with POLYVAE? YT-8012 can improved adhesion,flexural strength in bending,abrasion resistance,deformability.it has good rheology and water retention.can increase the sag resistance of  tile adhesives,it can made up to tile adhesives with excellent non-slump properties and putty with good properties.

Special features

POLYVAE?YT-8012 has no effect on rheological preperties and is a low-emissions, general-purpose powder in the medium Tg range. It is eminently suitable for formulating compounds of high ultimate strength.

Application

Typical applications for POLYVAE?YT-8012 : not only for blending with inorganic binders, such as cement, gypsum, plaster and hydrated lime for the manufacture of thin bed mortars, self-leveling mortars, wall troweling compounds, tile adhesive and joint filler, but also as the exclusive binder for synthetic-resin-bound systems.

Storage

POLYVAE? YT-8012 should be stored in a cool and dry place and protected against moisture. Since the product is thermoplastic. the storage temperature not over 30 Deg.C. It should not be subjected to pressure of high temperatures during storage because of the risk of caking. Storage time should not exceed 6 months from receipt of delivery. If you can't use out one bag on time, you'd better seal it again.

Package

In 25kg Paper compound plastic bags.

In 500kg jumbo bags on pallet

Packing on request

Additional Information:

Appearance	White  powder
Stabilizing system	Polyvinyl alcohol
Additive agent	Mineral Anti-block agent
Product Technical Data
Item	Unit	Value
Solids content	%	98.0-100.0
Ash content (1000℃)	%	10-14
Bulk density	g/l	480-590
Average particle size	μm	~80
PH value	—	5.0-9.0
MFFT(℃) approx	℃	4
Tg (℃)   approx	℃	+10