By spray gun for my own open mold development and production company, has a variety of colors



YX-004 Electrostatic powder coating machine:  (PG1)
 
Main data:
Input power: 40W
Weight: 30KG
Air pressure: 0.5Mpa-0.8Mpa
 
Main configuration:
Spray gun * 1 + powder pump * 1 + host * 1+ powder hopper* 1 + trolley * 1 + air pressure control valve * 1+ oil water separator * 1

Host	For the powder and gas source	Spray gun
Input voltage: 200-240v 50Hz	Solenoid valve control voltage: 24VDC	Input pressure: ≤0.3Mpa
Input powder: 50W	Input pressure: 0-0.6Mpa	The volume of the powder: max550g/min
	Output pressure: 0-0.5Mpa	Output voltage: 0-100KV
	The largest gas consumption: 13.2m/h (0.4Mpa)	Output current: 0-200uA
	Volume of powder barrels: 50L	Gun weight: 460g

1,High voltage module near the nozzle, make waste less voltage, high voltage components can be replaced, brings convenience to maintenance.
2,Low rotary atomizing air, greatly improving the coating quality.
3,Intuitive for powder reasonable two-way flow meter display.
4,Low because chooses big flow pneumatic components in smaller airflow pressure, still can achieve higher amount of powder.
5,For powder device is full stainless steel, can need not tools can easily remove and clean all parts. 
6,Two lines of the design of the central gas, make a needle guide body no longer product powder, strengthened the discharge effect, improve the rate of powder.