JET 22-44 Pro-3 22-44 Pro 3HP, 1Ph Sander with DRO

Details

• Infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 ft. per minute
• Patented conveyor belt TRACKERS, dramatically reduce the need for manual belt adjustments
• 22 in. wide suspended drum is supported on both ends with a truss-like carriage arm for greater strength and easy alignment to the table surface for consistent performance
• Sealed and permanently lubricated drum ball bearings for longer life
• Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a constant smooth sanding action for better results
• Adjustable drum height and downward pressure feature virtually eliminates snipe
• Large cast-iron handwheel adjusts height at 3/32 in. per turn for precise sanding thickness control
• Patented abrasive take-up fasteners make changing abrasives quick and easy
• Depth gauge has locking stop to ensure accuracy
• On/off switch with overload protection is front-mounted for operator's convenience

• 22-44 Pro 3HP, 1Ph Sander with DRO - 649600

Specifications

Weight: 385 lbs.
AC Voltage: 230V
Bearing Diameter: 1 in.
Conveyor Motor: 43 in-lbs. Direct Drive 0.45A
Conveyor Speed (FPM): 0 - 10
Drum Diameter: 5 in.
Drum Length: 22 in.
Drum Speed (RPM): 1600
Dust Port Size: 4 in.
Horsepower: 3
Max. Board Thickness: 4 in.
Max. Board Width: 44 in.
Min. Board Length: 2-1/4 in.
Min. Board Thickness: 1/32 in.
Motor Phase: 1
Type: Mobile Base

Please feel free to tell us for question you may have or you can visit our website for more information.