Small Power 30W/40W CO2 Laser Power Source for Mini Laser Machine

1) 35w Laser Marking Machine Main Features

 

Specificity: It is designed exclusively for engraving machines and can be applicable to 40W

and 30W laser tube.

Powerful Features and High Integrity: It makes the high voltage power supply, drive control

board and auxiliary power of drive motor integrate in one board, so as to reduce external

lead and strengthen the anti-interference ability.

Advanced Technology: The power adopts Soft Switch Technology, so dramatically increase the efficiency of the power supply, boost reliability of the power supply and also lengthen the life

of laser.

High Security: The input and output of power supply are separated completely to avoid electric shock.

Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc.

Easy Control of Laser Power: The laser power conversion can be controlled by a regulation resistance.

The power supply has open circuit protection: Under the condition of good protective earthing,

the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply.

Application: Engraving, seal-cutting, etc.

 

2. Laser Power Supply Specification:

Input	Input Voltage	AC220V or AC110Vto be specified when placing order
	AC frequency	47440HZ
	Cold Surge Current	≤60A(AC220V Input)	≤30A(AC110 Input)
	Current Leakage	≤0.7MAAC220V Input	≤0.4MA(AC110V Input)
Output	Max Output Voltage	DC 25KV	DC 5V	DC 24
	Max Output Current	DC 20MA	3A	2A
Efficiency	≥90full load
MTBF	≥10000H
Response Speed	≤1msfrom the switch Signal is given to the output current up to 90% of the setting current
Control Interface	TTL level switch control (details refer to the control terminal specification)
Withstand Voltage	Input-Output, Input-Shell: AC1500V 10MA 60S
Protection	can work in open-circuit condition for a short timeRequire a good protective earthing and avoid arc between the positive and the machine shell
Environment	Operating Temperature-10~40,Relative Humidity (RH)≤90
Cooling Way	Natural air cooling
Dimension	L×W×H=210*180*60(mm)

 

Technical Support

 

1. All our item is pass the ISO9001 and CE quality Certification. 

2. We are the manufactory of the Co2 Laser Power Supply, and have strict quality control system, so that we cansupply the best quality products with lowest prices for our client. 

3. We have a professional technical support group for all the item selling. If you need any assistance on your 

item problem, please do not hesitate to contact us, our technical support will be there to assist you.  

4. Manual testing: Make sure the power supply and laser tube wiring correct firstly, offline the control line and 

then press the red button" TEST" to test laser tube out light or not, this method can be simple judgment power supply is working correctly.

 

Warranty

 

Whole Power Supply one year              

Free charge of the maintenance back to our factory (Besides shipment charge)

Free charge of accessories sending to your door (If broken by non-artificial factors within warranty)

24 hours online supporting technical service