This equipment is designed and manufactured for simulate heat and ultraviolet radiation of the sun, rain and dew, to inspect and predict the aging resistance of the product according to the testing result, and is helpful to optimize the products. the testing type damage include: bleaching, discoloration, gloss loss, powder, crack, turbidity, bubble-based, strength decline and oxidation.

It's widely used in the industry, such as coating, printing ink, paint, resin, plastics, print, packing, motor van, cosmetic, metal, electron, galvanization, medical, and so on.

(1) Condensation device simulates the humidity of outdoor.

(2) Electronic-eye irradiance control system

(3)with high precise temperature sensor

(4) simulate humidifying, condensation and water spraying circulating test.

Standard Compliance
(1)ISO 48-3-2006, Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps;

(2)ASTM D4329-2005, Standard Practice for Fluorescent UV Exposure of Plastics;

(3)ASTM D4587-2005, Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings;

(4)ASTM D5208-2001, Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics, etc. 

(5)GB/T14552-2008, GB/T16422.3-1997, GB/T16585-1996, ASTM D4329, ISO 4892-3, ISO 11507, SAE J2020 

Safety Notice
1 Exposure under UV light for long time will hurt eyes and skins, also UV light on it will generate ozone, high concentration ozone will make people uncomfortable like headaches, chest stuffiness etc. To avoid such danger, it is necessary to keep ventilation on site and wear protective equipment.

2 To ensure machine safety, need to install external protection devices and connect with right power source.

3 Prevent for test of easy-firing, easy explosive, poisonous, corrosive materials.

4 Non-professional personal can not disassemble and maintenance the machine .

5 The machine should be well grounded. If there is troubles of the machine and need to change the spare parts , please replace with the same model ones.

6 Can not open the testing door during test.