| Usage: | Shock impact Testing Machine |
|---|---|
| Power: | Hydraulic |
| Model Number: | BS-50 |
| Brand Name: | DGBELL |
| Place of Origin: | China (Mainland) |
Quick Details
Specifications
Brief Introduction & Application
This Shock control measurement system is a special shock wave capture and analysis platform that based on high quality DSP con structuredynamic measure, analysis and control. It consists of control system, measurement system & software system based on WINDOWS to control modular & low noise design measurement hardware to achieve control & measure sub functionalhardware electrical circuit installing in the interface cabinet with independent integral con structure( independent control cabinet and measurement cabinet). USB2.0 is introduced to connect thecommunicationof interface cabinet & PC. This test system is applicable for impact capture, measurement, analysis in a general shock and high impact and complies with standards ISO, MIL-STD, IEC, OEO, ASTM etc.
Features
1. Employs pneumatic principle to solve pin breaking and low speed variation of variable cam shock table and reproduce actual shock impact environment.
2. Essential Components such as sealing rings, solenoid valve are sourced from world-branded Parker, SMC to ensure tester quality and reliability.
3. Height measuring devices with advanced electric sliding scale, fully computer control ,with high precision
Height measuring system introduces with advanced motorize slide scale, fully computerized control to ensure high accuracy.
4. Reasonable bench top structure design with high reliability, high performance, wide application, which is applicable for test specimens with large load & large torque in a frequent shock & impact test demand.
Standard Compliance
1.YD/T 2344.1—2011 LiFePO4battery system for telecommunications. Part 1:Integrated battery system
2.GB/T 2423.5Environmental testing for electric and electronic products. Part 2: Test methods. Test Ea and guidance: Shock
3.GB/T 2423.6Environmental testing for electric and electronic products. Part 2: Test methods. Test Eb and guidance: Bump
4.IEC 68-2-29Test Eb and guidance:Bump
5.JJG497-2000Verification Regulation of Bump Testing Machines
Working Conditions & Tehnical Parameters
|
Model |
BS-50 |
|
1.Max. Loading Capacity : |
50kg |
|
2.Bench Size : |
500mm×700mm |
|
3.Pulse Wave : |
half-sine wave |
|
4.Shock Peak Acceleration : |
half-sine wave: 25~1000m/s2 |
|
5.Pulse Width: |
half-sine wave:2~20ms |
|
6.Max. Shock Frequency: |
80times /min |
|
7.Max.Drop Height: |
120mm |
|
8.External Dimension : |
L800 X W640 X H710mm |
|
9.Power Consumption : |
Bench power consumption 2.0KVA;Air compressor power consumption 11.0KVA; |
|
10.Bench Weight : |
1100Kg |
|
11.Power Source : |
AC 380V±10% 3Phase 50Hz |
|
12.Air Source /Air supply pressure : |
0.8m3/min/8kg/cm2 |