Pneumatic grouting pumpUse compressed air as the power source, the use of gas Cylinder and grouting cylinder with a larger area ratio, so that the smaller pressure can cause the cylinder to produce a higher injection pressure.Pneumatic grouting pump is suit for mine, tunnel.Water conservancy, subway, construction, bridges and other construction sites of grouting plugging water, fill the gap, reinforcement of broken rock and other processes.

the characteristics of the pneumatic grouting pump:

1.Small volume, light weight, easy to transport,adapt to multipoint grouting that move frequently.

2.Due to adopt pneumatic transmission,the pump's performance is very suitable for the condition of when grouting pressure is low but need high flow capacity, and grouting pressure is high but need low flow capacity.

3.It can be used in the environment of flammable, explosive, water, dust, etc. Because of using pneumatic transmission.

4.Mainly used for single-fluid grouting, but also in accordance with the 1:1 double liquid grouting.

Pneumatic injection pump is mainly used for underground injection grouting in Roadway Bolting, and subway, tunnel grouting for stopping up water and broken rock grouting consolidation project.Shotcrete machine, injection pump and steel bar processing machinery, rammer, vibrating tamping rammer,ground polishing machine.

Contact me if you interested in it!