The  is engineered special for pipe reducing. It offers an economic and space saving way to combine a reducing pipe fitting with an expansion joint, different sized pipe can be jointed by big and small flanges. Specifying Concentric Rubber Reducer to help solve piping system vibration or movements problems as well as connection problems.

Features and Benefits:

1, Versatile hand-built construction. Made in China

2, Absorbs directional movement

3, Absorbs vibration, noise and shock

4, Compensates for misalignment

5, More compensation capability

6, Combine a reducing pipe with an expansion joint

7, Embedded steel reinforce ring enable the pressure resistance

8, Solid galvanized steel floating flanges speed the installation time

9, Special grooved flange ring design, prevent rubber end pull out

10, High tensile aircraft cable is embedded in the raised face rubber ends to prevent pull out and avoids the sharp cutting edge of solid steel rings

11, No gaskets required; integrally rubber flanged design, no gaskets required, DIN PN10/16 drilling standard, other flange drilling available, including ANSI 150lb/300 lb, BS, and JIS

Note:
1. Pressure/Vacuum rating is based on neutral installed length(F/F).
2. Pressure rating is based on 30℃ operating temperature. The pressure rating is reduced at higher temperatures
3. Weights in the above table are joints with DIN PN16 drilling retaining ring flanges.
4. Movements shown in the above table are non-concurrent.
5. Control units must be used when piping is not properly anchored.
6. Rated pressure in the above table is the maximum "working pressure". Test pressure is 1.5 times "working pressure", Burst pressure is 4 times " work pressure".
7. Normally, the flange drilling is based on DIN PN16, ANSI 150/250/300 lbs, BS PN10, JIS 10K are also available upon request.

We love hearing from our customers and value your feedback.Here are ways to contact us, 24 hours a day, 7 days a week. web: