EFP camera fiber connection system(JM-EFP-S13)consists of camera fiber optic adapter (TX) and fiber optic base station (RX) , custom-designed for long-distance transmission of EFP live production system, to transmit a 3G/HD-SDI signal from the camera side to the Base Station and a return video (3G/HD-SDI),1x TC ,Sony Remote control data,intercom(support clearcom), 2xTally, The system puts all of the signals needed for multi-camera 3G/HD-SDI production onto 2xSM fiber with ST interface.

EFP camera fiber connection system(JM-EFP-S13) Power supply:

This product is the battery power supply, the camera fiber optic adapter (TX) hanging on the camcorder via the front A shaped gusset plate , the back hanging battery while power supply to the camera and fiber optic adapter;and there's space for Lemo opto-electric hybrid cable power supply in the future.

EFP camera fiber connection system(JM-EFP-S13) Features:

Easily pass the Pathological test(extremely harsh environments)

SD, HD, 3G automatic input detection, support 270Mbit / s - 1.48Gbit / s - 3Gbit / s rate, support SMPTE-424M 3Gbps HD-SDI, SMPTE-292M HD-SDI, SMPTE-259M SDI serial digital video signals and DVB-ASI signals

Uncompressed lossless transmission without delay;

More than 10KM transmission distance up to a maximum 80KM; when the opto-electric hybrid cable power supply the distance up to 250 meters.

Aluminum precision manufacturing, the size is about the BP battery size, lightweight and convenient, V-type with a flexible pinch;

Supports Sony Remote control

Mic level input (with mute function) and amp functions (volume adjustment)

Tally output +12V or dry Contact Closure optional

Wide temperature range, low power consumption

V-mount battery optional

EFP camera fiber connection system(JM-EFP-S13) Application:

Television studio, mobile studio

EFP Electronic Field Production, major sporting events and large celebrations broadcast live

ENG camera (outdoor photo camcorders) upgraded to a EFP camera.

EFP camera fiber connection system(JM-EFP-S13) Specifications:

General index

Work Temp	-25°C to 55°C
Storage Temp	-40°C to 85°C
humidity	0 ~ 95% (non-condensing)
Camera Optic Adaptor
Input power	DC 12~19V
Power consumption	<10W
Net weight	1kg
Appearance size	V-Type the size is 160mm*100mm*44mm

Camera optic adaptor image as below:

Optic Base Station
Input power	AC90~240V
Power consumption	<10W
Net weight	3kg
Appearance size	19" 1U standard rack mount

Optic base station image as below:

Optical:

Wavelength	1310nm / 1550nm / CWDM
Output Power	-6~-1dBm
Rx sensitivity	<-18dBm
Transmission Distance	SM fiber 10+km , MM fiber 300m
Optical connector	Dul ST (optional)

SDI input/output:

Signal format	SMPTE 424M, SMPTE 292M, SMPTE 259M
Data rate	270Mbit/s - 1.48Gbit/s - 3Gbit/s
Cable Equalization	Automatic cable EQ (Belden 1694A cable) 250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s
SDI interface	BNC 75 Ohm
SDI Channel	1CH (camera side to base side),1CH(base side to camera side)

Intercom:

Camera Optic Adaptor
Interface	5pin XLR(Female)
Microphone	Mic inputs with mute and pre-amps
Headphone	with volume up or down
Optic Base Station
Interface	Input:3pin XLR Female , Output: 3pin XLR Male
Audio	Party line

Tally:

Camera Optic Adaptor
Interface	4pin Aviation connector
Output	Dry Contact Closure
	On: short or +12V Off: open or 0V
Optic Base Station
Interface	DB9(Male)
Input	Dry Contact Closure
	On: short to GND or TTL low Off: open or TTL high

Remote:

Camera Optic Adaptor
Interface	8pin sony's remote interface
Data	Sony
Optic Base Station
Interface	8pin sony's remote interface
Data	Sony

Product Name	EFP camera fiber connection system(JM-EFP-S13)
Product Model	JM-EFP-S13
SDI Connector	BNC
Optical Fiber	Dual ST fibers,Compatible with multimode or single mode fiber
Power Supply	AC85-260V/50Hz /DC 12V
SDI Format	1)All inputs and outputs are equalized and re-clocked
	2)Immune to pathological patterns over the entire link budget and operating temperature range
	3)SMPTE 424M-2006, 292, 259 and DVB-ASI compliant
	4)Supports embedded audio and data signals
	5)Support SDSDI & HDSDI & 3GSDI, Support 270M & 1.485G & 2.97G SDI Video
Dimension	TX: V-Lock on camera end, RX: 19" 1U rack mount on base end
Working Environment	Working Temperature: 0 ℃~+85 ℃; Relative Humidity: 0 ~ 95% (no cold condensation)
Warranty	2 Years warranty
Product description	Compliance: 3G, HD, SD compliance, SMPTE 424M, SMPTE 292M, SMPTE 259M
	1 x 3G-HDSDI, forward direction (from tx)
	1 x 3G-HDSDI, Reverse direction
	1 x TC,reverse analog signal
	1x intercom( microphone audio and headphone in(from TX),party line
	1xRemote control(Sony)
	2 x Tally (dry contact closure)
	Rx Dimension: 480 x 250 x 50 (mm) = 19' standard case
	Grosse weight is about 5.8kg,
	Extends distance: Single mode 10km / Multi mode 300 meters
	Packing in box: Transmitter x1, Receiver x 1, Power wire x 1, Use mannual x 1

Transmitter ( Camera fiber adaptor )	Receiver ( Base end )
Shape: V-lock	Shape: 1U Rack mount
Video: 1x 3G-HDSDI input, 1x 3G-HDSDI output, BNC connector	Video: 1x 3G-HDSDI input, 1x 3G-HDSDI output, BNC connector
TC:1x Analog signal,BNC connector	TC:1x Analog signal,BNC connector
Intercom: 1x 5 Pin XLR, female,mic level audio input,	Intercom: 2x 3 Pin XLR, Male and Female, party line
Tally: 1x 4 Pin Aviation Connector,2xDry contact closure,	Tally:1x DB9 Connector,2x Dry contact closure,
Remote: 1x 8 Pin Sony Connector for sony remote	Remote: 1x 8 Pin Sony connector for sony remote
Vol Control: Mute, Vol+, Vol-,
Fiber : 2xST	Fiber : 2xST
Power supply: DC12V input	Power supply for base end: 1x AC 90-240V,
LED indicator: TC, SDI in, SDI out, PWR,Mic	LED indicator:TC,SDI in,SDI out,Fiber,PWR

Panel diagram:

Illustration of Led Indicator Status

Adapter:

• MIC: Green light on when MIC is turned on.
• FIBER: Green light on when Fiber2 is connecting, or not green light blink.
• TC OUT: Green light on when the TC OUT port has a signal, or not green light blink.
• SDI IN: Green light on when the SDI IN port input a signal, or not green light blink.
• SDI OUT: Green light on when the SDI OUT port has a signal, or not green light blink.
• PWR: Red light on when power supply is turned on.

Base:

• SDI OUT: Green light on when the SDI OUT port has a signal, or not green light blink.
• SDI IN: Green light on when the SDI IN port input a signal, or not green light blink.
• TC IN: Green light on when the TC IN port input a signal, or not green light blink.
• FIBER: Green light on when Fiber2 is connecting, or not green light blink.
• POWER: Red light on when power supply is turned on.

Fiber1 and Fiber2: