operating temperature: -20^oC ~ 150 ^oC

★flow: 3m3/h ~ 400 m3/h

★pump lift: 15m ~ 125m

★ product summarize:

 Fluoroplastics CQB magnetic-type pump is the application of modern magnetic theory, the use of permanent magnets to achieve non-contact indirect transmission of a chemical process pum. When the external rotor motor drive (that is, outside the magnet) assembly rotates through the magnetic field through the magnetic line of force within the rotor drive isolation kit (that is, inside the magnet) synchronous rotating assembly and the impeller, closed in the static dielectric isolation kit so that no leakage of the purpose of pumping medium, Solve the mechanical transmission pump seal leakage, is sealed, no leaks, a new type of non-polluting industrial pumps. CQB-type magnetic chemical process pump is to prevent running, run, drip, drain phenomenon, the elimination of environmental pollution, and create "no-leak Workshop", "no leak factory", the realization of security, the ideal of civilized production pump.

★ Use: This product is widely used in petrochemical, acid alkali, non-ferrous metal smelting, automotive manufacturing process of pickling, rare earth separation, pesticides, dyes, medicine, papermaking, electroplating, radio and other industries. Temperature: -20 - 100.

According to the basis of size of concrete foundation do a good job with good anchor bolts into the buried;

In response to pre-installation inspection of pumps and motors, all parts should be non-destructive, pump should be no debris;

Place the pump units on the pump platform, a pairs of wedge pad pump should be put in place between pump floor and pump platform, by adjusting the wedge cushion, to find the level of the pump. After transfer, tightening bolt.

The inlet and outlet pipe of pump should set a separate bearing bracket.

When the installation has finished, the final rotation coupling by hand to check whether or not the phenomenon of rubbing touch, turning easily, even without strings while moving the installation of the end of the phenomenon.

In order to prevent debris entering the pump, filter should be located in the entrance, filter area should be greater than the pipe cross-sectional area of 3 to 4 times.

High lift pump on the road in the export control check valve should also be security against a sudden                           shutdown of the water hammer damage.

To ensure a high degree of compliance with the installation of pump NPSH pump and piping losses and consider the medium temperature.