The panels have the following key features:
? 4, 8, or 16 conventional input zones.
? 2 notification appliance circuits (NAC) with built-in synchronization for ANSI 3.41and Gentex.
? The panel comes with a 3 amp power supply.
? Dedicated alarm and trouble relays.
? 1 RS485 can be able to connect repeaters.
? Housed in a 335mm W x 264mm H x 88mm D metal enclosure.
? Enclosure supports two 12V, 7Ah backup batteries.
Electrical Specifications:
Primary AC 120VAC 50/60 Hz
Power supply rating 240VAC 50/60 Hz
Power supply rating 3 Amps @ 24VDC
Maximum Battery Charging Current 0.98 Amps @ 2 6VDC
Initiating Device Circuits 4 Zones Alarm Zone 1, 2, 3, & 4
Initiating Device Circuits 8 Zones Alarm Zone 1, 2, 3, 4, 5, 6, 7, & 8
Initiating Device Circuits 16 Zones Alarm Zone 1, 2, 3, 4, 5, 6, 7, 8,9,10,11,12,13,14,15, &16 Normal Initiating Operating Voltage 23VDC, Maximum 2 6VDC
Regulated Short Circuit Initiating Current (per zone) 35mA
Maximum Initiating Resistance (per zone) 10 ohms
Initiating End -of -Line Resistor 3K9 ohms, 1/2W 5%
Standby Detector Current (per zone) 4mA
Maximum Detector Count (per zone) 30 detectors
Initiating Cabling Type 18AWG Twisted Shielded pair (14 – 18 AWG)
Detector Base Impedance 430 ohms Notification Appliance Circuits 2 NACs,
Special Applicate on Maximum NAC Current Rating 1 Amp maximum per circuit Total NAC Signaling Current 2 Amps total with 3 Amp power supply NAC Operating Voltage 26VDC Nominal, 30VDC Maximum NAC End -of -line Resistor 4.7K ohms 1/2W 5% FAULT Relay rating 2A & 30VAC, resistive Alarm ( Auxiliary ) Relay rating 2A & 30VAC, resistive