Specifications
Lithium (LiPo/LiIo/LiFe) battery cell count: 2 – 8 series
Pack voltage range: 4.0 – 43.0VDC (USB can provide lower voltage 1.0V)
Alarm pack voltage range: 0.1 – 43.0VDC
Cell voltage range: 1.3 – 4.9VDC
Alarm cell voltage range: 1.3 – 4.9VDC
Voltage display resolution: 1mV
Current loading of test: 8mA
Maximum voltage for alarm port: 50VDC
Current drain for alarm port: <500mA
Log Files storage: 16Mbit (43 hours@2 seconds logging interval)
Sample logging time interval: 0.5 – 60 seconds
PC Connect: USB port

Special features
? Small size with multiple functions, backlight 128*64 lattices LCD and Buzzer Tone Reminder; the
interface can be operated smoothly.
? CellLog 8S can not only measure 2-8S Li battery individual voltage, but also measure NiMH, NiCd, Pb
battery pack voltage.
? It can be set Individual Voltage Alarm and Pack Voltage Alarm, Overvoltage Alarm, Low Voltage Alarm,
Differential Voltage Alarm and Time Over Alarm. What's more, the extra alarm output can be linkage
controlled by the users.
? It has 8 sets default monitor alarm settings, which can be selected for different battery packs.
? CellLog 8S has been 100% calibrated before it enters to the market, at the same time, it supports the
calibration by users themselves.
? The logging interval can be set by users' different needs. CellLog 8S has a 16Mbit flash storage, which
can log offline data in 43 hours @2 seconds logging interval.
? Support upgrading the hardware program by USB port. The CellLog 8S also supports the ―logview‖
software and can display, plot and analyze the charge and discharge data by it. (See detail information
about logview in the following website: http://)