Introduction
CY509 leak tester is a kind of tester that use compression air to produce negative
pressure by vacuum device to test the seal capability and processing technique of soft
plastic packaging material.
It has advantages of easy operation, novel design, convenient to observe test result,
especially to detect some tiny pole leak.

Application
It is applicable in testing the seal of soft packaging in food and pharmaceutical industry, etc. It can test the seal
capability of soft packaging accurately, which provides scientific date for relative
technical requirement. It also can test the specimen which has done drop and
compression test.

Work principle:
Through vacuumize the vacuum chamber to let the sample dipped in the water have an
inside and outside pressure difference. By observe the air leak or water permeate case
to judge the seal capability of the sample.
air pressure difference between the inside and outside of the sample ---- air expand ---
air leak--- air new balance--- air rate rise in the inside of the sample--- air expand rate
rise--- sample receives bigger pressure--- air leak stronger.
Remark: the parameter's set is according to the products' inside air rate, for example,
the high air rate of the sample, the high inside air expand rate, so the vacuum pressure
should be set lower.

Standard
GB/T 15171, ASTM D3078 -1994,GB/T27728
Parameter
Vacuum degree: 0～-90Kpa
accuracy: +1%
Inside dimension of vacuum: Ф270mm×210mm(H)(Customize)
                         Ф360mm×585mm(H)(optional)
                         Ф460mm×330mm(H)(optional)
Customer self provide air supply, compression air pressure range: 0.5-0.7 Mpa
Dimension:490x370x130mm
Power:AC220 V 50Hz