Introduction

1.     mechanical property testing and researching by tensile, compression, bending, torsion, shearing test for metal, nonmetal, composite material by room temperature.

2.     sheet, board, belt, foil, flat bar, wire, bar, proximate matter, pipe, shape of square, rectangle and ring, cast iron, non-titanium alloy, tube section specimen, proportion specimen(proportion factor k=11.3 or 5.65), non-proportion specimen, total wall thickness longitudinal and crosswise splited specimen, rectangle cross-section sample, round cross-section sample.

3.     test with variety of metal sheet, wire, thin thread, fiber, elastomer, foam.

4.     textile, food, medicine, cosmetic, rubber, plastic, thin film, biological material.

5.     tensile, peeling and welding test with eletronic element.

6.     test for peeling, bending and fastener property with printing circuit board.

7.     tensile test with wood, paper and film product.

8.     stress relaxation test and adhesive bonding test.

 

important specification

 

	item	specification
1	Starting of high speed	0～1500mm/min/0.3s
2	Stopping of high speed	1500～0mm/min/0.3s
3	Precision of speed	±0.2%
4	Resolution of position	0.033μm
5	Precision of position control	±0.2%
6	Precision of loading	±0.5% of displaying value
7	Rate of gathering	500Hz, 1000Hz
8	Loading capacity	100N, 200N, 500N, 1000N, 2000N, 5000N
9	Test speed	0.0001--1500mm/min(60in/min)
10	Test speed	0.0001--1000mm/min(40in/min)