Introduction

1 tensile, compression and bending test with variety of rubber, plastic, film, nonmetal material, and composite material.

2 test with variety of metal, thin metal, wire, fine wire, fiber, elastomer, foam

3 test with textile, food, medcine, cosmetic, and biology material.

4 tension, peeling, welding strength of electronic component.

5 peeling, bending, fastening property with printing circuit board.

6 test with production made of wood, paper, film.

Important specification
WDS-XD 50 100  200  500  1000  2000  3000  5000
1
Max. Loading force
50N
100N
200N
500N
1000N
2000N
3000N
5000N
2
Grade of testing machine
Grade 1/0.5
3
Measure range of loading
1%～100%FS
4
Relative error of indicating value
between ±1.0%(grade1)/±0.5%(grade 0.5)
5
Resolution of loading
0.01N
6
Resolution of deformation
0.01mm
7
Adjusting range of force controlled speed
0.005%-5%FS/S
8
Control precision of force controlled speed
When speed is <0.05%FS, between ±1% of setting value
When speed is ≥0.05%FS, between ±0.5% of setting value
9
Adjusting range of speed for deformation
0.00--5%FS/s
10
Control precision of speed for deformation
When speed is ＜0.05%FS/s, between ±1% of setting value, 
When speed is ≥0.05%FS/s, between ±0.5% of setting value
11
Adjusting range of speed for displacment
0.2～500mm/min; (customized high speed system: 0.001-1500mm/min)
12
Control precision of speed for displacement
between ±1.0% of setting value
13
Loading mode
Computer auto control
14
Moving stroke of transom
1000mm / 1200mm / 1400mm
15
Measure range of large deformation
10-800mm / 1000mm / 1200mm
16
Voltage
～220V±10%   50Hz(reliable landing)
17
Rate
400w