Main function:

This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.

 

Main features:   

1. Adopt  Panasonic servo motor,the beam moves up and down to test the load through the transmission.

2. The whole control system is safe and high reliability.

3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves.

4. Microcomputer for data processing and  analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves.

5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves.

6. Has limit protection, overload protection, emergency stop and other safe protective functions.

 

Applicable industry:

It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested..

 

Technical parameters:   

Model	RT-201A
Maximum load	50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade	1grade / 0.5 grade
Effective measuring range	Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy	the value ±1% /  the value ±0.5%
Tester resolution	Max load: 1/200000, constant the resolution
Load sensor	Basic configuration sensor max load: one
Effective tensile stoke	500mm (can be increased the tensile space according to customers requirement )
Testing speed	From 0.001 to 500mm/min
Accuracy of displacement measurement	Tolerance:±0.5% / tolerance: ±0.2%
Safety	Electronic-limit protection
Testing platform moving  device	Fast /slow( two speeds to control ),can jog
Return Back	Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection	Overload 10%, automatic protection
fixture	A set of tensile clamp
Machine size	45x58x135cm (L*W*H)
Motor	Delta AC  servo motor and drive
Power supply	220V , 50HZ or according to the requirement
Power	0.4KW ( depending on different demand of force,using different motor)
weight	About 75KG
Unit	KG,N,LB, TON can be exchanged.