Product Description

Main features: 

Processes:

Roll-fed type, label in-fed from label station is conveyed to label in-feed roller through label guide roller. Sensors will check I-MARK of label automatically when label reaches label in-feed roller. As soon as the position of I-MARK is confirmed, Encoder will adjust the operation speed of label in-feed roller and then appoint the label cutting position. Labels passing through label supplying roll and then go into label cutting part for cutting, and then the labels will be sent into vacuum label disk. When transducer checked the labels in vacuum label roll, the labels will be sent to glue drum for gluing;

The bottles on conveyor arranged by planet wheel, glued labels were stickled to bottles in bearing position, and then the labels will be stickled well with the effect synchronization belt;

Characters:

1 PLC control system, full-automatic working

2 Made of stainless steel SUS#304 and imported T6 aluminum alloy after being anode hardened, Side wheels-attaching mechanical sets

3 Main engine is controlled by three-phase converter motor, speed adjustable

4 Horizontally adjustable main engine, Vertically adjustable main engine (adjustment for label position)

5 Include such mechanisms as label-providing, belt-conveying, label-cutting, wheels-attaching, vacuum-adsorbing, hot sol-conveyance

6 Hot sol providing machine is made in a hundred million Hertz. VAC and PUMP don't start working unless the hot sol machine gets to designed temperature.

7 Vacuum label disk for label-pasting and label-adsorbing and vacuum manifold at the lower part of drum and cutter, made of heat & wear resistant material can be prevent from high heat; wrinkle process added can reduce label rub and friction;

8 Vacuum drum made of high rigid material to reduce friction and static

9 Easy operation to use handle to adjust label cutting knife. Rapid changeovers: modular design and  quick release change parts have changeovers fast and easy within ten minutes

10 Automatic label length controller to adjust position of I-MARK

11 Alarm for missing label or gap and Alarm for label running-out

Technical parameter: 

Model: OPP-300

Speed: 300B/Min

Labeling precision: +-1mm

Power source: 50/60HZ, 3PHASES, 380V AC, 24V DC

Total power: 7kw

Main motor: 1.5kw

Vacuum pump: 1.5kw

Gluing machine: 2.0kw

Hot melting machine: 1.7kw

Air source: 4-6kg/cm2

Air inlet: 3/8 inch

Operating condition: temperature:20℃~30℃(keep in dry place at the room's temperature)

Size: 4000*1500*2000mm

Weight:1500kg

Technician Overseas Installation & Maintenance